Home
Videos uploaded by user “Musty Yeti”
KX5 vs KX3 :: Size/Weight Comparison :: MustyYeti
 
02:51
In this video we will be comparing the size and weight of the Noveske KX5 to the KX3. After searching the web I found there was little covering the difference between the two muzzle devices. The pictures I did find didn't really help me grasp the difference in size. I made this video to help anyone who had questions or concerns with the differences between these two. The length is pretty much identical, and so is the weight. The big difference between these two is the overall diameter. The KX5 can fit under almost any low profile rail on the market, including the NSR. The KX3 couldn't fit under the NSR without modification, but now there are no issues with the KX5. The KX5 also sports a new Nitride finish. I actually prefer this finish as it's very durable and matches the overall rifle better. All and all I really like the new skinny pig. Thanks for watching.
Views: 58694 Musty Yeti
Flat Dark Earth AR15 vs. OD Green AR15
 
01:45
Alright guys, here is a quick side by side video so you can see the difference in colors and accessories. I'm pretty sure I list all of the differences but just in case I'm going to go ahead and list them here. We have different size backstraps on the MIAD grip kit, the FDE has the Medium and the ODG has the Large. The FDE has the enhanced trigger guard whereas the OD Green doesn't. The Flat Dark Earth has the Magpul B.A.D. Lever and the OD Green doesn't. The Flat Dark Earth has the EOTech 551 N Type battery whereas the OD Green has the EOTech 512 AA battery. The Flat Dark Earth has Traction tape cut for the PMAG whereas the OD Green doesn't. The Flat Dark Earth has a Yankee Hill Machine free float quad rail in the Specter length where as the OD Green has a Mil-Spec, none free float quad rail. The Flat Dark Earth has Tapco's the low profile vertical grip and the OD Green has Tapco's full size grip. The Flat Dark Earth has a Daniel Defense QD Swing Swivel mount whereas the OD Green uses the sling mount located on the stock front A2 sight. Onto sights, the Flat Dark Earth has Magpul's MBUS back up front sight whereas the OD Green has the stock front sight. Also the Flat Dark Earth has the Latter Rail cover on top whereas the OD Green has nothing but Magpul's XTM Rail covers. So this video is just to show you different options side by side so you can decide what you like better if you're thinking about buying any of these accessories.
Views: 186544 Musty Yeti
Atibal XP8 | A MUST BUY | Musty Yeti
 
08:38
MY IG: @MustyYeti Atibal IG: AtibalSights Atibal Website: www.atibalsights.com Today we are taking a look at the Atibal XP8, 1-8x scope. I've thoroughly enjoyed testing this scope out. The glass is great, the reticle is perfect, and being able to shoot at 1 or 8 power awesome. If you guys are in the market you HAVE to check this scope out, you will not be disappointed. Thanks for watching.
Views: 21135 Musty Yeti
Mag Tactical Upper :: 3lb AR build pt.5 :: Musty Yeti
 
03:34
In this video I'm discussing the uppers we looked at when continuing our search to build a 3 pound AR15. We first purchased a DPMS Slickside upper, which has no forward assist, dust cover, or brass deflector. We did this because we thought the lack of extra parts/material would make for a lighter upper. However once we got the upper we found out it weighs just as much, if not more, than a standard upper. Once we realized that we hit up the internet in search for a lighter upper. We didn't find much until we went through the comments of my videos. You guys recommended we check out Mag Tactical, which we did. Mag Tactical offers an upper comprised of a magnesium alloy. This blend makes for one of the lightest uppers on the market. Thanks for watching. My Facebook: www.facebook.com/MustyYetisTacticalHQ Music From: Black Vortex Kevin MacLeod (incompetech.com) Licensed under Creative Commons: By Attribution 3.0 http://creativecommons.org/licenses/by/3.0/
Views: 19288 Musty Yeti
KAK Industries Super Sig Buffer Tube :: Musty Yeti
 
04:26
In this video I'm covering the KAK Industries Super Sig Buffer Tube. I'm sure most of you are hesitant to purchase this like I was, but it truly is the best way to run your SB15 arm brace. KAK Industries machines their buffer tubes specifically for the SB15. What I mean by that is they machine a raised edge to stop the SB15 from moving forward while also increasing the length of the buffer tube so it sits flush with the end of the SB15. On top of that they also machine the diameter of their buffer tube to fit the Sig arm brace perfectly. The fit on this thing is perfect and I plan on buying another one for my second pistol build. Thanks for watching, take care. My Facebook: www.facebook.com/MustyYetisTacticalHQ Music From: Black Vortex Kevin MacLeod (incompetech.com) Licensed under Creative Commons: By Attribution 3.0 http://creativecommons.org/licenses/by/3.0/ Shane Snyder (Owner) Bruce Snyder (Camera Man)
Views: 10717 Musty Yeti
SI Viper PDW Stock | How To Install
 
08:06
My IG: @MustyYeti Strike Industries: https://www.strikeindustries.com Strike Industries IG: @strikeindustries_si Today is the day. Today we are installing the Strike Industries Viper PDW Stock. I've been waiting for this stock for some time now and it's great to finally have it in hand. This install is an absolute breeze. I you guys are looking for a PDW style stock, you should definitely try this stock out. For the price and quality, it can't be beat. Now to SBR an AR. Take care.
Views: 42440 Musty Yeti
CZ Scorpion Evo | How to Install Yeti Wurks Pistol Grip
 
04:40
Instagram: www.instagram.com/MustyYeti Facebook: www.facebook.com/MustyYetisTacticalHQ GearHead Works: www.gearheadworks.com/ Today is a really short video where we get rid of that obnoxious factory pistol grip, and replace it with the Yeti Wurks Matterhorn Grip. Like everything else with the Scorpion, this was a breeze to install. Thanks for watching and let me know if there are any other parts I should check out. Thanks. Music Credit: BenSound www.bensound.com/
Views: 14375 Musty Yeti
Killer Innovations | Glock Barrel & Comp | Triggrcon 2018
 
04:52
My second stop at Triggrcon 2018 was the Killer Innovations booth. After I saw what they had in their booth I had to get some video and share it with you guys. After talking with Rick it's apparent that Killer Innovations is producing some of the best quality aftermarket Glock barrels out there. On top of that, it's apparent their Glock comp was extremely well thought out and well executed. The range day reports were nothing but fantastic. Hopefully you guys enjoy the video and I really hope I can team up with Killer Innovations in the near future to bring you a closer look at some of their products.
Views: 5701 Musty Yeti
Leapers UTG Great buttstocks | Musty Yeti
 
07:02
Today we are taking a quick look at some excellent buttstock from Leapers UTG. We have 2 very different stocks that both offer a lot. Please let me know if you have any questions. Thanks for watching. Music Credit: BenSound www.bensound.com/
Views: 9659 Musty Yeti
Strike Industries LINK Curved Foregrip | Best Angle Grip? | MustyYeti
 
06:31
Instagram: www.instagram.com/MustyYeti Facebook: www.facebook.com/MustyYetisTacticalHQ Strike Industries: www.strikeindustries.com In today's video we are taking a quick look at the Strike Industries LINK Curved ForeGrip and LINK Picatinny Rail Section. I cover everything in the video but I will say that I'm thoroughly enjoying these two parts, especially the Curved ForeGrip. If you guys are in the market for a grip or rail section be sure to check to check out the links below. Thanks. LINK Curved ForeGrip: http://www.strikeindustries.com/shop/products/rifle-accessories/ar/fore-grips/si-link-curved-foregrip.html#.VwRsuKQrLIU LINK Rail Section: http://www.strikeindustries.com/shop/index.php/products/rifle-accessories/ar/rail-attachments/link-rail-section-7-slots-qd-featured-patent-pending-757.html#.VwRtKKQrLIU Music From: Hitman Kevin MacLeod (incompetech.com) Licensed under Creative Commons: By Attribution 3.0 http://creativecommons.org/licenses/by/3.0/
Views: 45448 Musty Yeti
STNGR HWK Rail Install | Musty Yeti
 
11:07
My IG: @MustyYeti STNGR website: https://www.stngrusa.com STNGR IG: @STNGRUSA Today we are installing the STNGR HWK 10" rail. This thing is super light and very very easy to install. Anyone can easily install this rail with minimum tools and experience. Two huge thumbs up to STNGR for making such a nice rail, this easy to install, at this super low price point. Thanks for watching.
Views: 48638 Musty Yeti
CZ Scorpion EVO 3 | How to Install KAK Industries Shockwave Blade Arm Stabilizer
 
07:22
Instagram: www.instagram.com/MustyYeti Facebook: www.facebook.com/MustyYetisTacticalHQ KAK's Website: www.kakindustry.com/ This is part one where we make some serious upgrades to the Scorpion Evo 3 pistol. In this video we are installing the KAK Industires Shockwave Blade Kit. This is a vast improvement of the Scorpion that is very easy to do. In the next video we will be installing an ambi safety to make this much more comfortable. Thanks for watching. Take care. Music Credit: BenSound www.bensound.com/
Views: 42260 Musty Yeti
Springfield XD Grip Options
 
03:18
Alright guys here are a couple grips that are made for the XD Series pistols. One is made by Pachmayr and the other by Hogue. The Pachmayr works fine, installs easy, and feels comfortable. The Hogue is harder to install but holds its place much better and is more comfortable in the hand. Thanks for watching please rate and subscribe
Views: 46121 Musty Yeti
14.5" BCM Barrel :: 3lb AR build pt.4 :: Musty Yeti
 
05:59
Today we are covering our barrel choice for our search to build a 3 pound AR15. We chose to go with a 14.5" Barrel from BCM. Now this isn't the lightest weight barrel on the market but it's definitely the most trusted. Like I said in the video we were looking at a VooDoo barrel but they didn't have the paper work we required. Either way this BCM barrel should get the job done.
Views: 16746 Musty Yeti
KMR vs NSR vs Alpha Rail :: Size & Weight :: Musty Yeti
 
04:48
My facebook: www.facebook.com/MustyYetisTacticalHQ Today's is a quick video where I compare not only the inside and outside diameter but also the weights of all three rails. The video is pretty self explanitory. The BCM KMR is the winner hands down. Music From: Black Vortex Kevin MacLeod (incompetech.com) Licensed under Creative Commons: By Attribution 3.0 http://creativecommons.org/licenses/by/3.0/ Shane Snyder (Owner) Bruce Snyder (Camera Man)
Views: 16802 Musty Yeti
Strike Industries Cookie Cutter Comp | MustyYeti
 
05:11
Facebook: www.facebook.com/MustyYetisTacticalHQ Instagram: www.instagram.com/MustyYeti In todays video I cover the Cookie Cutter Comp from Strike Industries. This is been one impressive muzzle device right from the get go. This device on shorter barreled SBRs and pistols really does mitigate the recoil and make follow up shots very easy. With the price tag of the Cookie Cutter you would be foolish not to try this out, because when you do, you will not regret it. Music From: Prelude to Action Kevin MacLeod (incompetech.com) Licensed under Creative Commons: By Attribution 3.0 http://creativecommons.org/licenses/by/3.0/
Views: 54500 Musty Yeti
Strike Industries PDW Pistol Brace & More
 
03:08
My IG: @mustyyeti Strike Industries: @strikeindustries Hello everyone, today we are at TriggerCon 2018, taking a look at 2 new pistol braces being offered by Strike Industries. I'm sure most of you have seen, and have been drooling, over the PDW brace. This is by far the best PDW brace, wait, the best pistol brace out there. Their brace gives you the ability to keep the package very small, but when needed, deploy the brace for a more comfortable shooting pistol. The lesser known of the two is their standard pistol brace, that has a very enticing price tag of 45 dollars. This is definitely a budget friendly option for those out there building a pistol on the cheap. The good news is, with Strike Industries, you won't be sacrificing quality with that lower price tag. I'm hoping to get my hands on one, if not both of these braces soon, and share them with you in more detail.
Views: 2464 Musty Yeti
Century Arms RAS 47 | Magpul Zhukov Furniture | MustyYeti
 
16:35
Instagram: www.instagram.com/MustyYeti Facebook: www.facebook.com/MustyYetisTacticalHQ Cenutry Arms: http://centuryarms.biz/ I think everything was covered in the video. I want to thank Anthony and Dina for sending me this AK for testing. The Century Arms RAS 47 is an excellent rifle and top notch AK. If you guys are in the market, you should really check out the RAS 47. You will not be disappointed. Music From: Hitman Kevin MacLeod (incompetech.com) Licensed under Creative Commons: By Attribution 3.0 http://creativecommons.org/licenses/by/3.0/
Views: 36921 Musty Yeti
Strike Industries Strike Switch | Musty Yeti
 
05:30
Today's video we are covering the excellent Strike Switch from Strike Industries. The video pretty much covers it all. However I will say that I absolutely love this ambi safety selector. If you guys are in the market for one, I highly suggest trying this one out. Thanks for watching.
Views: 27774 Musty Yeti
UTG PRO Super Slim 15" Rails | A Must Buy | MustyYeti
 
11:18
Facebook: www.facebook.com/MustyYetisTacticalHQ Instagram: www.instagram.com/MustyYeti UTG PRO Website: www.leapers.com/index.php Music From: Hitman Kevin MacLeod (incompetech.com) Licensed under Creative Commons: By Attribution 3.0 http://creativecommons.org/licenses/by/3.0/
Views: 77514 Musty Yeti
Spikes Tactical Pistol Buffer Assembly Kit :: AR Pistol Build pt.3 :: Musty Yeti
 
03:29
Today we are covering the Spikes Tactical buffer tube kit. This is a one stop shop for any of you looking to pick up a buffer tube for your AR pistol. Spikes Tactical includes everything you need. The buffer tube, buffer, buffer spring, end plate and castle nut. Now for the main attraction, the ST T2 buffer. This buffer is filled with a Tungsten powder. This powder is silent as your AR cycles and should help with felt recoil. The heavier buffer weighs between 4 and 4.5 ounces. your standard AR buffer weighs in at 2.9 ounces so the ST T2 is a tad heavier. Time will tell if this really does what they say it should. It seems to be the most popular buffer tube for SBRs and AR pistols, so it should work just fine. Thanks for watching.
Views: 11612 Musty Yeti
New Frontier Polymer Lower :: 3lb AR build pt.3 :: Musty Yeti
 
05:25
Today we are going over the New Frontier polymer lower. This is an all polymer lower. The trigger, safety, takedown pins, mag catch, and even the hammer are polymer. The only metal parts are the buffer tube components, bolt catch, action springs and pistol grip screw. That means you are getting a very lightweight lower from Frontier Arms. The body is made using a new formula and different reinforcing fibers than you're used to seeing. Once we install the Minimalist stock, stock end plate, and Magpul MOE K pistol grip we will be roughly a pound lighter than my Bushmaster lower. The only downside to this lower is the overall fit and finish. There is molding flash in several places where the seam lines are. On top of that the seem lines are very visible. While that is purely cosmetic it can be a problem if the burrs are located on your trigger. However these problems can easily be fixed at home in a short amount of time. If you guys have any questions please leave them in the comment box below. Thanks and take care.
Views: 20039 Musty Yeti
CZ Scorpion Evo | How to Install Gear Head Works Ambi Safety Install
 
05:10
Instagram: www.instagram.com/MustyYeti Facebook: www.facebook.com/MustyYetisTacticalHQ GearHead Works: www.gearheadworks.com/ Today we are improving upon the CZ Scorpion yet again. In this video we are removing that annoying, factory ambi safety, and replacing it with the excellent Gear Head Works ambi safety. This safety re locates the lever into a much more comfortable location. If you guys love AK's, this safety is for you. Thanks for watching and let me know if there's any parts you recommend. Take care. Music Credit: BenSound www.bensound.com/
Views: 13161 Musty Yeti
Blackhawks Quick Disconnet Kit
 
03:30
Here is one of the last pieces to my chest rig, Blackhawks Quick Disconnect kit. This piece is simply amazing guys. it allows me to easily and quickly change my holster from my hip to my chest rig. This is a piece that I would definitely recommend to anyone with a CQC holster with several mounting options.
Views: 18547 Musty Yeti
EOTech 551 Holographic Sight Review
 
04:08
Here is a closer look at my EOTech 551.A65/1. This EOTech uses N Type batteries which gives it a small 4 inch base. All the other specifics I mention in my video. Thanks for watching.
Views: 104469 Musty Yeti
STNGR HWK RAIL | So Hot Right Now | Musty Yeti
 
06:33
STNGR Website: www.stngrusa.com STNGR IG: stngrusa MustyYeti IG: MustyYeti Hello everyone, today we are checking out the 10" HWK rail from STNGR. This rail has been an absolute joy to shoot. It has everything you want and nothing you don't. It comes in at a crazy low price and with a great warranty. On top of that, anyone out there could easily install this thing. If you guys are remotely interested, buy one, you won't regret it.
Views: 10793 Musty Yeti
Bushmaster M4A3 Patrolman OD Green Review
 
03:42
Alright guys I've talked about it enough so here it is, my second AR15. This is my Bushmaster M4A3 Patrolman. It is the same model as my other Bushmaster Decorated in the Flat Dark Earth. Check it out and let me know what you think, thanks for watching.
Views: 89873 Musty Yeti
Blackhawk Serpa CQC level 2 holster for S&W M&P9 Pistol Review
 
04:56
Well here is a little run down of my Blackhawk Serpa CQC holster. There isn't much to say here that I didn't mention in my video. It's just a great holster that I would recommend to anyone. Thanks for watching please rate and comment.
Views: 91903 Musty Yeti
Daniel Defense 16" Barrel :: Hammer Forged/Chrome Lined :: Musty Yeti
 
06:32
A few days ago I uploaded the video showing off my upper well today the barrel showed up. Like I mentioned in the video barrels are hard to find. Everywhere I looked barrels were completely sold out. I checked one of my favorite websites DSGarms and found a 16", hammer forged, chrome lined barrel in stock. Now it cost a little more than I wanted to spend but I didn't want to wait. I plan on taking off the factory gas block and sending it to my friend Spiro, from Minuteman Munitions, to grind it down to a low profile gas block. All and all this is a great company and a great barrel. This AR should be done here shortly, stay tuned for the rail. Thanks.
Views: 9073 Musty Yeti
Magpul Remington 700 Stock | SHOT Show 2015 | Musty Yeti
 
04:58
Facebook: www.facebook.com/MustyYetisTacticalHQ Instagram: www.instagram.com/MustyYeti In this video I go over the new Magpul Hunter 700 stock for the Remington 700, short action. If you guys are like me you've wanted to get into the long range bolt action gun but didn't want to spend the money on those chassis. Magpul is now offering a great looking, and functional stock, for a great price. This is something anyone can afford and is a drastic improvement to the factory stock on Remington 700's. The biggest feature is the capability to have a magazine fed option. I'm looking forward to getting into the bolt action scene and purchasing this stock shortly after. Music From: Prelude to Action Kevin MacLeod (incompetech.com) Licensed under Creative Commons: By Attribution 3.0 http://creativecommons.org/licenses/by/3.0/
Views: 9735 Musty Yeti
Custom Glock 23 ( Dp Customs | Lightfighter Innova
 
06:00
Facebook: www.facebook.com/MustyYetisTacticalHQ Instagram: www.instagram.com/MustyYeti http://www.lightfighterinnovations.com/ http://www.dpcustomworksllc.com/ http://www.weaponworksllc.com/ I'm finally showing off my custom Glock 23. I would like to thank DP Custom Works and Lightfighter Innovations for their excellent work. Music From: Hitman Kevin MacLeod (incompetech.com) Licensed under Creative Commons: By Attribution 3.0 http://creativecommons.org/licenses/by/3.0/
Views: 7985 Musty Yeti
UTG PRO 15" Lightweight Keymod Rail Install (made in USA) | MustyYeti
 
13:47
Facebook: www.facebook.com/MustyYetisTacticalHQ Instagram: www.instagram.com/MustyYeti UTG's YouTube Install Video: https://www.youtube.com/watch?v=KDKYTztGphw UTG's Website: www.leapers.com Item #: MTU019SSKZ – Burnt Bronze (available in other colors) In todays video I'll be installing the UTG PRO 15" Lightweight Keymod Rail. As I mentioned in the video, this rail is pretty amazing in it's quality. From the machine work, to paint, to the way it installs. It truly is a fantastic rail, especially when you consider it's price point. It really can't be beat. Like I said in the video I've never installed a barrel and barrel nut before. This is the first I've ever attempted at the process and it was incredibly easy and I had zero issues. UTG definitely put a lot of thought into the installation process and how to make it as easy as possible on the end user. If you guys are in the market for a new rail I can't recommend this enough. It is definitely a top notch rail. Music From: Prelude to Action Kevin MacLeod (incompetech.com) Licensed under Creative Commons: By Attribution 3.0 http://creativecommons.org/licenses/by/3.0/
Views: 152918 Musty Yeti
ACCU WEDGE :: Does It Work??? :: Musty Yeti
 
07:01
Today I unbox the Acu Wedge along with the Noveske NSR rail covers. The Acu Wedge is designed to tighten up the slack between your upper and lower receiver. It easily installs in your lower receiver, just slides right in. I must say this thing really works. Now the slack between your upper and lower isn't a big deal. Every AR out there as some play between the two and it shouldn't really effect your accuracy. I was buying the NSR rail covers so I figured I would give it a shot. The Noveske NSR Rail covers are a great, they are lower profile, and adds very little weight. Inside the panel set are two hand stops which, are really nice. Now I've heard these are difficult to install so I hope they don't fight me too much.
Views: 89355 Musty Yeti
How To Change Muzzle Device | IWI Tavor | MustyYeti
 
08:50
Instagram: www.instagram.com/MustyYeti Facebook: www.facebook.com/MustyYetisTacticalHQ Today is a very quick video where I show how to swap out muzzle devices on the IWI Tavor. It's a simple process that can be done with standard household tools. Thanks for watching, take care. Music From: Hitman Kevin MacLeod (incompetech.com) Licensed under Creative Commons: By Attribution 3.0 http://creativecommons.org/licenses/by/3.0/
Views: 4170 Musty Yeti
How to Remove/Replace Dust Cover :: Strike Industr
 
09:12
This short video shows you how to remove/replace the factory dust cover on your AR15 rifle. Also, I will be installing the Strike Industries Ultimate Dust Cover (UDC). This is one amazing dust cover. By far it is the easiest dust cover to install on the market. Strike Industries was pretty cleaver in designing this to truly make a QD dust cover. Simply press in the spring loaded bar tab, insert it into the receiver, and you're all done. As I mentioned before it's made of polymer so it's very light and can be easily customized. Feel free to stipple or etch a design in this thing to make it a one of a kind. If you have any fitment issues like I did you can easily address them by taking a knife and shaving down some of the material. On top of that they are reasonably priced as well, around 15 dollars. Again I'll be giving one of these away in the future so stay tuned for that. Thanks for watching. SI UDC: http://www.strikeindustries.com/shop/index.php/rifle-accessories/ar/upper-parts/ar-ultimate-dust-cover.html Black Vortex Kevin MacLeod (incompetech.com) Licensed under Creative Commons: By Attribution 3.0 http://creativecommons.org/licenses/by/3.0/
Views: 17444 Musty Yeti
Lightweight AR pt.1 | Working Mans Armory Billet Lower | Musty Yeti
 
05:38
Facebook: www.facebook.com/MustyYetisTacticalHQ Instagram: www.instagram.com/MustyYeti WMA Website: http://workingmansarmory.com/ Music From: Prelude to Action Kevin MacLeod (incompetech.com) Licensed under Creative Commons: By Attribution 3.0 http://creativecommons.org/licenses/by/3.0/
Views: 3288 Musty Yeti
HOW TO INSTALL UltiMAK Rail with Magpul Zhukov Handguard | MustyYeti
 
16:07
Instagram: www.instagram.com/MustyYeti Facebook: www.facebook.com/MustyYetisTacticalHQ This is another quick video on how to install the UltiMAK scope mount onto your AK with the Magpul Zhukov Handguard. This should be a very quick and easy install for most of you. As you can see from the video I ran into some serious issues that made my install a bit more interesting. Thanks for watching. Music From: Hitman Kevin MacLeod (incompetech.com) Licensed under Creative Commons: By Attribution 3.0 http://creativecommons.org/licenses/by/3.0/
Views: 48685 Musty Yeti
B.A.D. - A.S.S. Installation
 
08:54
Here is a rough video on how to install the Ambidextrous Safety Selector by Battle Arms Development. I'll start out by saying it is an easy install that did not take long at all. Like I said in the video the hardest part is figuring out which levers to go with. If you guys have any questions on the install please let me know. Thanks for watching, please rate and subscribe.
Views: 20607 Musty Yeti
How to Cut Traction Tape for your PMAG's
 
08:03
Alright guys, here is my first how to video on cutting traction tape for your Magpul PMAG's. I hurried through this video to make it under the 10 minute mark for YouTube so if I went to fast or forgot something I apologize. Let me know if you have any questions, thanks for watching.
Views: 65154 Musty Yeti
Strike Industries Ambush Sling Loop :: Musty Yeti
 
04:32
Today we are taking a look at the excellent Ambush Sling Loop (ASL) from Strike Industries. This is THE lowest profile on the market and also one of the lightest. When the ASL is installed it actually sits lower then the picatinny rails themselves. This mount is capable of being mounted under any scope, red dot, or folding iron sights. Not only is this very low profile but it sports a very low price tag. This can be found online for around 24 dollars, lower in cost than any of it's competitors. The price is exceptionally low when you consider that you're getting a QD sling attachment point and a sling loop all in one mount. All and all I'm very impressed with the Ambush Sling Loop, so much that I've bought enough to replace all my RSA's. Take care and thanks for watching. My Facebook: www.facebook.com/MustyYetisTacticalHQ SI Website: www.strikeindustries.com SI Facebook: https://www.facebook.com/strikeindustries?fref=ts Music From: Black Vortex Kevin MacLeod (incompetech.com) Licensed under Creative Commons: By Attribution 3.0 http://creativecommons.org/licenses/by/3.0/ Shane Snyder (Owner) Bruce Snyder (Camera Man)
Views: 3741 Musty Yeti
Yankee Hill Free Float Quadrail :: Specter Length
 
04:26
Well here is the 2nd take of my updated of my Bushmaster M4A3 Patrolman. I realized I didnt really show the end cap or EOTech without the front A2 sight. I finally received all my parts from Yankee Hill Machine company and had them installed on my rifle. All together I have the YHM diamond series free float quadrail (specter length), YHM low profile gas block, extra Magpul XTM rail covers, and a Magpul MBUS back up front sight. Thanks for watching please rate and comment
Views: 55697 Musty Yeti
Remington 870 ::: Side Saddle Install :: Musty Yeti
 
08:07
In this video I'm installing my TacStar Side Saddle. I must say this was probably the easiest part I've ever installed on any of my weapons. This whole process could be done in 5 minutes or less with minimal tools. I think this side saddle really adds to the look of the 870. Now I'll just have to cross my fingers that it functions as good as it looks.
Views: 37638 Musty Yeti
Strike Industries Grips (Cobra Fore Grip & Patriot Tactical Grip) :: Musty Yeti
 
05:45
Today I'm discussing my thoughts on Strike Industries Cobra Tactical Fore Grip and the Patriot Tactical Grip, Enhanced PRO Model. I covered everything in the video but I have to say I'm really impressed with both of these grips. The Cobra Tactical Grip is small but offers A LOT that other grips don't. You have multiple choices of grip options and brace support. I didn't emphasize enough how much more comfortable this angle is versus the AFG. I've had numerous people shoot this AR and they've absolutely loved the Cobra Tactical Fore Grip. With all honesty I would without-a-doubt pick this over the AFG 6 days a week, and twice on Sunday. If you guys are in the market you really should try out the Cobra Tactical Fore Grip. The Patriot Tactical Grip, the Enhanced PRO Model is a very comfortable grip as well. Like I mentioned its larger so it fills up my hand a little better. That smaller back strap is definitely noticeable when you shoot. It is a tad smaller than I would like for my hands, but like I said if you have smaller hands this grip will suit you just fine. One thing I forgot to mention in the video is the sharp curve at the bottom of the grip. This is a really nice feature that Strike Industries added. This curve really helps to lock your hand in place to get a nice secure grip. All and all I really like both of these grips, you guys should really check out Strike Industries and see what they have. OH and on side note, they really do have some cool stuff coming out soon you should watch them closely... a new QD muzzle device that looks insane, a Cookie Cutter Muzzle device for your AR pistol owners, the Mega Fin offered in a keymod or MLOCK with a built in front iron sight, and much much more. Their Website: www.strikeindustries.com My Facebook Page: www.facebook.com/MustyYetisTacticalHQ Music From: Black Vortex Kevin MacLeod (incompetech.com) Licensed under Creative Commons: By Attribution 3.0 http://creativecommons.org/licenses/by/3.0/
Views: 16841 Musty Yeti
Strike Industries | Glock Slide Mods | Triggrcon 2018
 
07:34
Today we are checking out some of the Glock mods by Strike Industries. In a world of customized Glock slides, Strike Industries still found a way to be unique. Along with their slide they'll have Glock sights, triggers, and mag extensions coming out this year... and the one I'm really waiting for is their Gen3 Glock compensator. Thanks for watching and a HUGE thanks to strike industries for showing me this pistol. INSTAGRAM Me: @MustyYeti Strike Industries: @strikeindustries
Views: 3060 Musty Yeti
Bushmaster M4 Patrolman's Carbine Review
 
07:36
This is my first video covering my Bushmaster AR15. Just wanted to share my rifle and what I've done to it. The accessories are as fallows: Magpul CTR adjustable Stock Magpul ASAP Sling Plate Magpul MS2 Sling Magpul MIAD Grip Kit Ambidextrous Safety Magpul Dummy Rounds Magpul BAD Lever Magpul Pmag 30 Round with Window Custom Fit Traction Tape Magpul Pmag Ranger Plate Magpul MBUS Back-Up Sight Eotech 551 N Type Battery Mil-Spec 6.7" Quad Rail Tapco Low Profile Grip (3.125") Magpul XTM RAIL PANELS Thanks for watching please rate and subscribe.
Views: 666937 Musty Yeti
Trinity Force Alpha Stock & More Final Review
 
09:39
Trinity Force: https://www.trinityforce.com Trinity Force IG: @TrinityForceCorp My IG: @MustyYeti Hello everyone, today we are taking a look at all the gear sent to me by Trinity Force. Like I said in the video, I've had these parts for several months, and have run the absolutely crap out of them. All of these parts have been great. There's been a couple issues, that haven't been a deal breaker in the slightest. Overall I've really enjoyed everything and if you guys are hunting for parts, I recommend you check them out. Thanks
Views: 4969 Musty Yeti
How To Install +3 Mag Extension | Tyrant Designs
 
04:28
Hello everyone. Today I'm showing you just how easy it is to install the Tyrant Designs +3 Mag extensions for your Glock 43. Like it says in the thumbnail it's SO FAST and SO EASY. If you guys are in the market and need some extra rounds, this is definitely something you should check out. Musty Yeti IG: @MustyYeti Tyrant Designs IG: @
Views: 1266 Musty Yeti
Vltor Buffer Tube & Magpul CTR Stock (install)
 
10:09
Well I finally had time to record the install of my new parts on my AK-47. I hope you guys understand how hard it was to have these parts for days and not be able to install them because I couldn't record it. Today the house was finally empty enough to record the install so here it is. Thanks for watching.
Views: 110228 Musty Yeti
Canik TP9SF Elite - Is It the Best Pistol??? | Musty Yeti
 
10:26
Follow Me On Instagram: @MustyYeti Today we are taking a look at the Canik TP9SF Elite. This pistol has been an absolute joy to test out and shoot. I cover everything in the video but I will say that this is a GREAT bang for your buck. If you are in the market you can't go wrong with the Canik TP9SF Elite. Music Cred: ChenBear
Views: 9981 Musty Yeti
Midwest Industries Parts (Ejection Port Cover, Ris
 
15:23
Facebook: www.facebook.com/MustyYetisTacticalHQ Instagram: www.instagram.com/MustyYeti Tavor Intro: https://www.youtube.com/watch?v=RLlxbFMesIE Music From: Hitman Kevin MacLeod (incompetech.com) Licensed under Creative Commons: By Attribution 3.0 http://creativecommons.org/licenses/by/3.0/
Views: 14500 Musty Yeti