Home
Videos uploaded by user “EricTheCarGuy”
What is VTEC and How Does it Work? - EricTheCarGuy
 
02:21
VTEC or Valve Timing Electronic Control is a system that's been used by Honda in passenger cars since 1991. I believe the 1991 NSX was the first production vehicle to get this system. It has since been used in several other Honda vehicles. Late model VTEC equipped vehicles use the iVTEC system which also changes cam timing as well as lift and duration. The system is designed to give you the 'best of both worlds'. You get to switch between 2 cam profiles. One for fuel economy, one for performance. A lot of people think that when VTEC kicks in you get an extra boost of power. Not true in my experience. It does however extend the torque curve to give you more performance after it does switch over. There is no set RPM where VTEC switches. The computer looks at several variables and calculates when to activate the VTEC solenoid. It's a cool system and for the most part rarely has issues. The most common issues I've seen with VTEC are the result of low, or incorrect oil viscosity. So if you have a VTEC engine, keep the oil topped off and make sure you use the viscosity listed on the oil cap. The animations are courtesy Honda Motor Company, thanks guys. The best place for answers to your automotive questions: http://www.ericthecarguy.com Facebook: https://www.facebook.com/EricTheCarGuy?fref=ts Twitter: https://twitter.com/EricTheCarGuy Google+: https://plus.google.com/100195180196698058780/posts Information on Premium Membership: https://www.ericthecarguy.com/premium-content-streaming-etcg-content Stay Dirty ETCG Due to factors beyond the control of EricTheCarGuy, it cannot guarantee against unauthorized modifications of this information, or improper use of this information.  EricTheCarGuy assumes no liability for property damage or injury incurred as a result of any of the information contained in this video. EricTheCarGuy recommends safe practices when working with power tools, automotive lifts, lifting tools, jack stands, electrical equipment, blunt instruments, chemicals, lubricants, or any other tools or equipment seen or implied in this video.  Due to factors beyond the control of EricTheCarGuy, no information contained in this video shall create any express or implied warranty or guarantee of any particular result.  Any injury, damage or loss that may result from improper use of these tools, equipment, or the information contained in this video is the sole responsibility of the user and not EricTheCarGuy.
Views: 2000074 EricTheCarGuy
Torquing Wheels and Why It Is Important - EricTheCarGuy
 
02:42
This is a quick tip response to my disc brake video. A very observant viewer mentioned this important fact that I forgot to put into the original video so I will correct that here. Wheel torque probably accounts for at least some percentage of persistent brake vibrations. Thanks to BigBlockMustang for pointing this out, and thank you for watching. I've recently gotten to the 100 subscriber mark and hope to do something special for you in the not to distant future. If you have any show ideas please post a response to this video or send me a PM with your questions. BigBlockMustang's channel http://www.youtube.com/user/bigblockmustang Something I found recently found that might be of help is this torque chart for different manufacturers. http://www.discounttire.com/infoCenter/infoWheelTorque.html --- Click below and Stay Dirty Visit me at EricTheCarGuy.com http://ericthecarguy.com/ Visit EricTheCarGuy Forum http://www.ericthecarguy.com/forum/default.aspx Visit my Facebook Page: http://www.facebook.com/EricTheCarGuy --- Stay dirty ETCG
Views: 347365 EricTheCarGuy
Removing Brake Drums, The "Easy" Way - Eric The Car Guy
 
02:21
Removing Brake Drums, The "Easy" Way - Eric The Car Guy http://www.ericthecarguy.com/ Here is a little quick tip that I plan to post as a response to the brake shoe replacement video, my hope is this will save some broken studs and help some of those that have requested this very procedure. I hope this helps some of you with this PITA issue. --- Click below and Stay Dirty Visit me at EricTheCarGuy.com http://ericthecarguy.com/ Visit EricTheCarGuy Forum http://www.ericthecarguy.com/forum/default.aspx Visit my Facebook Page: http://www.facebook.com/EricTheCarGuy --- ETCG Due to factors beyond the control of EricTheCarGuy, it cannot guarantee against unauthorized modifications of this information, or improper use of this information.  EricTheCarGuy assumes no liability for property damage or injury incurred as a result of any of the information contained in this video. EricTheCarGuy recommends safe practices when working with power tools, automotive lifts, lifting tools, jack stands, electrical equipment, blunt instruments, chemicals, lubricants, or any other tools or equipment seen or implied in this video.  Due to factors beyond the control of EricTheCarGuy, no information contained in this video shall create any express or implied warranty or guarantee of any particular result.  Any injury, damage or loss that may result from improper use of these tools, equipment, or the information contained in this video is the sole responsibility of the user and not EricTheCarGuy.
Views: 1059970 EricTheCarGuy
O2 Sensor Basics - EricTheCarGuy
 
03:23
This will be the beginning of a series that I'm going to do on computer controlled systems. I've had quite a bit of response to the check engine light video and I think this is the next logical step. I've covered the basic operation of an O2 or oxygen sensor as the basis for closed loop operation. This will probably not be the last time I cover information on O2 sensors, there is so much more to these than meets the eye. Visit me at EricTheCarGuy.com http://ericthecarguy.com/ Visit EricTheCarGuy Forum http://www.ericthecarguy.com/forum/default.aspx Visit my Facebook Page: http://www.facebook.com/EricTheCarGuy Stay Dirty ETCG
Views: 618283 EricTheCarGuy
How To Perform a Compression Test - EricTheCarGuy
 
10:00
Compression Testing and What You Can Learn From It - EricTheCarGuy Here is a video on performing a compression test on an engine to assess it's mechanical condition. An engines ability to compress air and fuel is directly proportional to it's performance since an engine is nothing more than an air compressor once you take away all the controls. A compression test is a good general test that will give you an idea of the engine's overall health but it does not give specific information on what the problem is should there be one, for that a "leak down test" would be required, here is a link to that video. http://www.youtube.com/watch?v=WgrfT0LFMhc However if you find yourself looking for the source of a performance problem with an engine, this is a great place to start. This test is often overlooked in favor of looking at the fuel or ignition system, I think that's a mistake, if an engine can't perform mechanically no amount of electronics will make that better. Recently, I hit the 500 subscriber mark and I'd like to thank all of my subscribers past, present, and hopefully in the future for that. I enjoy making these videos and the fact that you seem to like watching them means a lot to me. So, thanks for subscribing, rating, and commenting, those little contributions make it all worth while. --- Click below and Stay Dirty Visit me at EricTheCarGuy.com http://ericthecarguy.com/ Visit EricTheCarGuy Forum http://www.ericthecarguy.com/forum/default.aspx Visit my Facebook Page: http://www.facebook.com/EricTheCarGuy --- Also see the video I did, "Octane Ratings and the 4 Stroke Engine Cycle" for more information on how compression works and why it is important. http://www.youtube.com/watch?v=8VWEwEveGTQ Thanks for watching and stay dirty ETCG Due to factors beyond the control of EricTheCarGuy, it cannot guarantee against unauthorized modifications of this information, or improper use of this information.  EricTheCarGuy assumes no liability for property damage or injury incurred as a result of any of the information contained in this video. EricTheCarGuy recommends safe practices when working with power tools, automotive lifts, lifting tools, jack stands, electrical equipment, blunt instruments, chemicals, lubricants, or any other tools or equipment seen or implied in this video.  Due to factors beyond the control of EricTheCarGuy, no information contained in this video shall create any express or implied warranty or guarantee of any particular result.  Any injury, damage or loss that may result from improper use of these tools, equipment, or the information contained in this video is the sole responsibility of the user and not EricTheCarGuy.
Views: 1494985 EricTheCarGuy
How To Bleed A Cooling System - EricTheCarGuy
 
05:59
How To Bleed A Cooling System - EricTheCarGuy Kind of a request, I've described this procedure a few times in print but never made a video. As I said in the video if your having issues with a fluctuating idle, no heat, or an overheat problem you may want to start here. Also, if you have just serviced the cooling system in any way this is the procedure I recommend to fill it back up. The only regret I have with this one is the end where I didn't shoot footage of closing up the radiator using the tool that I used in the video, I may show it at some point in the future. Here is a link, perhaps an old link, to the "Spill Free Funnel" http://www.amazon.com/s/?ie=UTF8&keywords=spill+free+funnel&tag=googhydr-20&index=aps&hvadid=4031750381&ref=pd_sl_67pg14j0u6_b --- Click below and Stay Dirty Visit me at EricTheCarGuy.com http://ericthecarguy.com/ Visit EricTheCarGuy Forum http://www.ericthecarguy.com/forum/default.aspx Visit my Facebook Page: http://www.facebook.com/EricTheCarGuy --- Stay dirty ETCG Due to factors beyond the control of EricTheCarGuy, it cannot guarantee against unauthorized modifications of this information, or improper use of this information.  EricTheCarGuy assumes no liability for property damage or injury incurred as a result of any of the information contained in this video. EricTheCarGuy recommends safe practices when working with power tools, automotive lifts, lifting tools, jack stands, electrical equipment, blunt instruments, chemicals, lubricants, or any other tools or equipment seen or implied in this video.  Due to factors beyond the control of EricTheCarGuy, no information contained in this video shall create any express or implied warranty or guarantee of any particular result.  Any injury, damage or loss that may result from improper use of these tools, equipment, or the information contained in this video is the sole responsibility of the user and not EricTheCarGuy.
Views: 2274981 EricTheCarGuy
What to Look for in a Salvage Yard Engine or Transmission
 
03:39
**Sponsored Video**Purchasing a salvage engine or transmission can save you a lot of money over buying new. Not every deal is a good one though. You need to look the engine or transmission over before you purchase it. This video outlines some of the things to look for in a salvage yard engine or transmission. If you're not familiar with Pull-A-Part, they're a self service salvage company in the US. They have 25 yards in 12 states. I'm not just saying this, but they've become my favorite place to go for salvage parts. I suggest you check them out. To make it easy, here's a link to their website: http://www.pullapart.com The best place for answers to your automotive questions: http://www.ericthecarguy.com Camera: Erik Tande Thanks for watching! Discussion about this video: http://www.ericthecarguy.com/kunena/18-The-EricTheCarGuy-Video-Forum/64230-what-to-look-for-in-a-salvage-yard-engine-or-trans **Answers to your automotive questions found here: http://www.ericthecarguy.com/faq Related Videos Check Out Pull-a-Part!: https://www.youtube.com/watch?v=g8sDU2N2AQU What To Look for in a Salvage Engine or Transmission: Tools To Bring to the Salvage Yard: https://www.youtube.com/watch?v=cYLUEhTt30U How To Supply Power While You're at the Salvage Yard: Salvage Yard Pulls Playlist: https://www.youtube.com/playlist?list=PLSzhQ6St-ov1HXAlQz_cbjUIpTpjskU5X **Answers to your automotive questions found here: http://www.ericthecarguy.com/faq Social Network Links Facebook: https://www.facebook.com/EricTheCarGuy?fref=ts Twitter: https://twitter.com/EricTheCarGuy Google+: https://plus.google.com/100195180196698058780/posts Instagram: http://instagram.com/ericthecarguy Information on Premium Membership: https://www.ericthecarguy.com/premium-content-streaming-etcg-content Stay Dirty ETCG Due to factors beyond the control of EricTheCarGuy, it cannot guarantee against unauthorized modifications of this information, or improper use of this information.  EricTheCarGuy assumes no liability for property damage or injury incurred as a result of any of the information contained in this video. EricTheCarGuy recommends safe practices when working with power tools, automotive lifts, lifting tools, jack stands, electrical equipment, blunt instruments, chemicals, lubricants, or any other tools or equipment seen or implied in this video.  Due to factors beyond the control of EricTheCarGuy, no information contained in this video shall create any express or implied warranty or guarantee of any particular result.  Any injury, damage or loss that may result from improper use of these tools, equipment, or the information contained in this video is the sole responsibility of the user and not EricTheCarGuy.
Views: 136233 EricTheCarGuy
The Most Important Part of a Brake Job!
 
03:12
I’ve done a lot of brake jobs in my career, and I didn’t always perform this procedure, but I’ve come to find it makes for the best brake job ever. If you want to know how to make your brakes stop better than ever, watch this video! My Patreon Account: https://www.patreon.com/EricTheCarGuy The best place for answers to your automotive questions: http://www.ericthecarguy.com Check out the ETCG Blog for the latest info: https://www.ericthecarguy.com/blog Check out my ETCG1 channel: https://www.youtube.com/user/ETCG1?sub_confirmation=1 Thanks for watching! Useful info on solving brake problems: http://www.ericthecarguy.com/faq/solving-brake-problems Related Videos Torquing Wheels and Why it is Important: https://www.youtube.com/watch?v=DA4ug4gHccM&t=10s Front Disc Brakes and How To Replace Them: https://www.youtube.com/watch?v=lAviOGXzEUk How To Replace Rear Disc Brakes: https://www.youtube.com/watch?v=3kf8C4Qxu-A How To Replace Brake Fluid By Yourself: https://www.youtube.com/watch?v=V5O_pbC8R2E How To Replace Drum Brake Shoes: https://www.youtube.com/watch?v=MCpCkun2qxA How To Diagnose and Replace a Bad Caliper: https://www.youtube.com/watch?v=_UqTgYgd0Mk Do Steel Braided Brake Lines Help You Stop Better?: https://www.youtube.com/watch?v=5hwJWSe2huc&t=2s Replacing Rotors With Tapered Roller Bearings: https://www.youtube.com/watch?v=ccsbu2hT0MI Brake Shim Fail: https://www.youtube.com/watch?v=WsaEtMaW6Qw How To Replace a Master Cylinder: https://www.youtube.com/watch?v=trotrlIG2sk Mini Cooper Parking Brake Cable Replacement: https://www.youtube.com/watch?v=p5-dfMVqkhk&t=4s The Mini Series: https://www.youtube.com/watch?v=3WpqmJT_Wc0&list=PLSzhQ6St-ov37fMEv1xKYiu36MgvzUscu **Answers to your automotive questions found here: http://www.ericthecarguy.com/faq Social Network Links Facebook: https://www.facebook.com/EricTheCarGuy?fref=ts Twitter: https://twitter.com/EricTheCarGuy Google+: https://plus.google.com/100195180196698058780/posts Instagram: http://instagram.com/ericthecarguy Wanna see more stuff like this from ETCG? Information on Premium Membership: https://www.ericthecarguy.com/premium-content-streaming-etcg-content Stay Dirty ETCG Due to factors beyond the control of EricTheCarGuy, it cannot guarantee against unauthorized modifications of this information, or improper use of this information.  EricTheCarGuy assumes no liability for property damage or injury incurred as a result of any of the information contained in this video. EricTheCarGuy recommends safe practices when working with power tools, automotive lifts, lifting tools, jack stands, electrical equipment, blunt instruments, chemicals, lubricants, or any other tools or equipment seen or implied in this video.  Due to factors beyond the control of EricTheCarGuy, no information contained in this video shall create any express or implied warranty or guarantee of any particular result.  Any injury, damage or loss that may result from improper use of these tools, equipment, or the information contained in this video is the sole responsibility of the user and not EricTheCarGuy®.
Views: 115833 EricTheCarGuy
How To Plug A Tire and Check For Leaks - EricTheCarGuy
 
06:24
How To Plug A Tire and Check For Leaks - EricTheCarGuy http://www.ericthecarguy.com/ Hello again, I hope you enjoy this latest offering. I'm sure there will be those that disagree with this practice but thats OK, I feel there are times when it can be done and save a bunch of work resealing a tire. This also shows my preferred method of checking for leaks which I hope you benefit from. Don't forget I have a second channel now ETCG1, stop by and check it out you might like it. http://www.youtube.com/user/ETCG1 --- Click below and Stay Dirty Visit me at EricTheCarGuy.com http://ericthecarguy.com/ Visit EricTheCarGuy Forum http://www.ericthecarguy.com/forum/default.aspx Visit my Facebook Page: http://www.facebook.com/EricTheCarGuy --- Due to factors beyond the control of EricTheCarGuy, it cannot guarantee against unauthorized modifications of this information, or improper use of this information.  EricTheCarGuy assumes no liability for property damage or injury incurred as a result of any of the information contained in this video. EricTheCarGuy recommends safe practices when working with power tools, automotive lifts, lifting tools, jack stands, electrical equipment, blunt instruments, chemicals, lubricants, or any other tools or equipment seen or implied in this video.  Due to factors beyond the control of EricTheCarGuy, no information contained in this video shall create any express or implied warranty or guarantee of any particular result.  Any injury, damage or loss that may result from improper use of these tools, equipment, or the information contained in this video is the sole responsibility of the user and not EricTheCarGuy.  And as always, Stay Dirty ETCG
Views: 498048 EricTheCarGuy
How To Use A Grease Gun To Lube A Chassis - EricTheCarGuy
 
02:58
How To Use A Grease Gun To Lube A Chassis - EricTheCarGuy Visit me http://www.ericthecarguy.com/ I know this one is kind of basic, but for ETCG there is nothing too basic. Unfortunately most vehicles today don't have grease fittings any more so this video may not apply to you and may not help you at all but for those of you that have these fittings consider yourself lucky since with regular lubrication those parts will last just about forever. --- Click below and Stay Dirty Visit me at EricTheCarGuy.com http://ericthecarguy.com/ Visit EricTheCarGuy Forum http://www.ericthecarguy.com/forum/default.aspx Visit my Facebook Page: http://www.facebook.com/EricTheCarGuy --- Stay dirty! ETCG
Views: 227377 EricTheCarGuy
How To Find A Vacuum Leak - EricTheCarGuy
 
05:56
Vacuum leaks are one of the biggest causes of engine performance problems. This video is pretty straight forward in it's approach to finding a vacuum leak. On thing I might mention is that not all vacuum leaks are at the engine. Some HVAC systems run on engine vacuum and can cause a leak under the dash in some cases. I've even seen vacuum operated door locks. Just be sure to be careful spraying flammable stuff on a hot engine, you don't want to take one problem and make it a whole lot worse. You can also use a spray bottle with water to do this same test. It may not be as effective, but you don't have to worry about spraying a flammable substance on a hot engine. For more information on diagnosing engine performance issues, check out this article I wrote. http://www.ericthecarguy.com/faq/solving-automotive-performance-issues The best place for answers to your automotive questions: http://www.ericthecarguy.com Facebook: https://www.facebook.com/EricTheCarGuy?fref=ts Twitter: https://twitter.com/EricTheCarGuy Google+: https://plus.google.com/100195180196698058780/posts Information on Premium Membership: https://www.ericthecarguy.com/premium-content-streaming-etcg-content Stay Dirty ETCG Due to factors beyond the control of EricTheCarGuy, it cannot guarantee against unauthorized modifications of this information, or improper use of this information.  EricTheCarGuy assumes no liability for property damage or injury incurred as a result of any of the information contained in this video. EricTheCarGuy recommends safe practices when working with power tools, automotive lifts, lifting tools, jack stands, electrical equipment, blunt instruments, chemicals, lubricants, or any other tools or equipment seen or implied in this video.  Due to factors beyond the control of EricTheCarGuy, no information contained in this video shall create any express or implied warranty or guarantee of any particular result.  Any injury, damage or loss that may result from improper use of these tools, equipment, or the information contained in this video is the sole responsibility of the user and not EricTheCarGuy.
Views: 3429205 EricTheCarGuy
How To Diagnose Exhaust Restrictions -EricTheCarGuy
 
06:12
Visit me at: http://www.ericthecarguy.com/ If you're experiencing poor performance, overheating, pinging, or having trouble getting up hills you might want to check to see if you have a restricted exhaust. An engine needs to breath which means that not only does it need to take in air but it also needs to get rid of the spent air, much like we do when we exhale. If it's not able to do that properly you'll experience all kinds of performance issues including lack of power. This video shows an easy non obtrusive way to check to see if you have an exhaust restriction using a vacuum gauge. A vacuum gauge can tell you a lot about how your engine is running including if you have a restricted exhaust. If you do find that you have a restriction you can confirm it by either dropping the exhaust at the manifold or removing an O2 sensor and taking it for a drive. If it runs better you likely have an exhaust restriction. Don't assume it's the catalytic converter though as I've seen mufflers and exhaust pipes cause restrictions as well. Here's a video on how to check your Catalytic Converter should you suspect it's bad. http://www.youtube.com/watch?v=9VZ5K8n5jj0&feature=youtu.be Stay dirty ETCG Discussion about this video: http://www.ericthecarguy.com/kunena/18-The-EricTheCarGuy-Video-Forum/42701-diagnosing-exhaust-restrictions#43854 Due to factors beyond the control of EricTheCarGuy, it cannot guarantee against unauthorized modifications of this information, or improper use of this information.  EricTheCarGuy assumes no liability for property damage or injury incurred as a result of any of the information contained in this video. EricTheCarGuy recommends safe practices when working with power tools, automotive lifts, lifting tools, jack stands, electrical equipment, blunt instruments, chemicals, lubricants, or any other tools or equipment seen or implied in this video.  Due to factors beyond the control of EricTheCarGuy, no information contained in this video shall create any express or implied warranty or guarantee of any particular result.  Any injury, damage or loss that may result from improper use of these tools, equipment, or the information contained in this video is the sole responsibility of the user and not EricTheCarGuy.
Views: 185138 EricTheCarGuy
Salvage Yard Tip: Don't Be a Selfish Tool!
 
02:21
**Sponsored Video**While I was at Pull-A-Part in Atlanta, we decided to make a video about 'salvage yard etiquette'. I had a ton of fun with Erik Tande of Velosity Labs making this video. Most of this is common sense, but you'd be surprised at how often you see this bad behavior in the salvage yard. So next time you're at the salvage yard, try and keep these helpful tips in mind. If you're not familiar with Pull-A-Part, they're a self service salvage company in the US. They have 25 yards in 12 states. I'm not just saying this, but they've become my favorite place to go for salvage parts. I suggest you check them out. To make it easy, here's a link to their website: http://www.pullapart.com The best place for answers to your automotive questions: http://www.ericthecarguy.com Camera: Erik Tande Thanks for watching! Discussion about this video: http://www.ericthecarguy.com/kunena/18-The-EricTheCarGuy-Video-Forum/64133-salvage-yard-tip-don-t-be-a-selfish-tool **Answers to your automotive questions found here: http://www.ericthecarguy.com/faq Related Videos Check Out Pull-a-Part!: https://www.youtube.com/watch?v=g8sDU2N2AQU What To Look for in a Salvage Engine or Transmission: Tools To Bring to the Salvage Yard: How To Supply Power While You're at the Salvage Yard: Salvage Yard Pulls Playlist: **Answers to your automotive questions found here: http://www.ericthecarguy.com/faq Social Network Links Facebook: https://www.facebook.com/EricTheCarGuy?fref=ts Twitter: https://twitter.com/EricTheCarGuy Google+: https://plus.google.com/100195180196698058780/posts Instagram: http://instagram.com/ericthecarguy Information on Premium Membership: https://www.ericthecarguy.com/premium-content-streaming-etcg-content Stay Dirty ETCG Due to factors beyond the control of EricTheCarGuy, it cannot guarantee against unauthorized modifications of this information, or improper use of this information.  EricTheCarGuy assumes no liability for property damage or injury incurred as a result of any of the information contained in this video. EricTheCarGuy recommends safe practices when working with power tools, automotive lifts, lifting tools, jack stands, electrical equipment, blunt instruments, chemicals, lubricants, or any other tools or equipment seen or implied in this video.  Due to factors beyond the control of EricTheCarGuy, no information contained in this video shall create any express or implied warranty or guarantee of any particular result.  Any injury, damage or loss that may result from improper use of these tools, equipment, or the information contained in this video is the sole responsibility of the user and not EricTheCarGuy.
Views: 142842 EricTheCarGuy
Stripped Thread Repair: How To Install Thread Inserts
 
06:32
While doing the final repairs on my T-5 Transmission I needed to do some thread repair. Because of that, I decided to make this quick video on how to repair threads with thread inserts. I use a Heilicoil in this video, but this information will apply to most thread insert repair kits. I get my thread repair kits here: https://www.jbtoolsales.com/search.php?q=thread+repair#oid=1002_1 Thread Measuring Kit: https://www.jbtoolsales.com/irwin-12087-metric-measuring-kit-w-thread#oid=1002_1 Link to T-5 Repair Updates Video: Video link posted when video available Camera: Brian Kast Thanks for watching! Discussion about this video: http://www.ericthecarguy.com/kunena/18-The-EricTheCarGuy-Video-Forum/63417-stripped-thread-repair-thread-insert-install The best place for answers to your automotive questions: http://www.ericthecarguy.com Related Videos Fairmont Video Playlist: https://www.youtube.com/watch?v=L22GsHQi7tU&list=PLSzhQ6St-ov2nxWVKCeU14Vt7JJ_QSZvs New Fairmont Parts: https://www.youtube.com/watch?v=LKS0ZLQJpUA Ultimate T-5 Manual Transmission Rebuild with Paul Cangialosi & EricTheCarGuy (Full/Extended Version): http://www.ericthecarguy.com/premium-content-web/13-premium-content-videos/1434-ultimate-t-5-manual-transmission-rebuild-with-paul-cangialosi-ericthecarguy-full-extended-version Ultimate T-5 Manual Transmission Rebuild with Paul Cangialosi & EricTheCarGuy (Part 1): https://www.youtube.com/watch?v=XREsRG9Y1mU Ultimate T-5 Manual Transmission Rebuild with Paul Cangialosi & EricTheCarGuy (Part 2): https://www.youtube.com/watch?v=mR8LetFQSoc T5 World Class Rebuild Kit Parts. Visiting EricTheCarGuy: https://www.youtube.com/watch?v=SzsBiHjsXxE How Synchronizers Work (5Speeds.com): https://www.youtube.com/watch?v=MXsRfbOiBhE What Speedometer Gear is Right For You?: https://www.youtube.com/watch?v=fMEe5SySuxA A Quick Easy Way To Determine Axle Ratio: https://www.youtube.com/watch?v=xY1mcbotJ9A A Brief History of the T-5 Transmission: https://www.youtube.com/watch?v=oVPAeTnRdA0 How a Clutch Works: https://www.youtube.com/watch?v=FfjGohWy-OU How To Diagnose a Bad Clutch: https://www.youtube.com/watch?v=h7JJ_g2UuBI How To Drive a Stick: https://www.youtube.com/watch?v=D2C_eNV6znw Social Network Links Facebook: https://www.facebook.com/EricTheCarGuy?fref=ts Twitter: https://twitter.com/EricTheCarGuy Google+: https://plus.google.com/100195180196698058780/posts Instagram: http://instagram.com/ericthecarguy Information on Premium Membership: https://www.ericthecarguy.com/premium-content-streaming-etcg-content Stay Dirty ETCG Due to factors beyond the control of EricTheCarGuy, it cannot guarantee against unauthorized modifications of this information, or improper use of this information.  EricTheCarGuy assumes no liability for property damage or injury incurred as a result of any of the information contained in this video. EricTheCarGuy recommends safe practices when working with power tools, automotive lifts, lifting tools, jack stands, electrical equipment, blunt instruments, chemicals, lubricants, or any other tools or equipment seen or implied in this video.  Due to factors beyond the control of EricTheCarGuy, no information contained in this video shall create any express or implied warranty or guarantee of any particular result.  Any injury, damage or loss that may result from improper use of these tools, equipment, or the information contained in this video is the sole responsibility of the user and not EricTheCarGuy.
Views: 101300 EricTheCarGuy
Learn How A Clutch Works In Less Than 5 Minutes - EricTheCarGuy
 
04:33
Learn How A Clutch Works In Less Than 5 Minutes - EricTheCarGuy http://www.ericthecarguy.com/ This one is actually part of a series on clutches so be sure to check out the Integra full length clutch video as well as Adjust A Cable Operated Clutch. --- Click below and Stay Dirty Visit me at EricTheCarGuy.com http://ericthecarguy.com/ Visit EricTheCarGuy Forum http://www.ericthecarguy.com/forum/default.aspx Visit my Facebook Page: http://www.facebook.com/EricTheCarGuy --- Stay dirty ETCG Due to factors beyond the control of EricTheCarGuy, it cannot guarantee against unauthorized modifications of this information, or improper use of this information.  EricTheCarGuy assumes no liability for property damage or injury incurred as a result of any of the information contained in this video. EricTheCarGuy recommends safe practices when working with power tools, automotive lifts, lifting tools, jack stands, electrical equipment, blunt instruments, chemicals, lubricants, or any other tools or equipment seen or implied in this video.  Due to factors beyond the control of EricTheCarGuy, no information contained in this video shall create any express or implied warranty or guarantee of any particular result.  Any injury, damage or loss that may result from improper use of these tools, equipment, or the information contained in this video is the sole responsibility of the user and not EricTheCarGuy.
Views: 1566528 EricTheCarGuy
#SalvageYardHack: How To Get Power in the Yard
 
02:07
Say you need to power something up while you're at the salvage yard. Here's a quick easy way to do that with a power tool battery, some wires, and some safety pins. With this set up you can add power to any electric motor to test it's operation or to move a power window like I did in this video. If you're not familiar with Pull-A-Part, they're a self service salvage company in the US. They have 25 yards in 12 states. I'm not just saying this, but they've become my favorite place to go for salvage parts. I suggest you check them out. To make it easy, here's a link to their website: http://www.pullapart.com The best place for answers to your automotive questions: http://www.ericthecarguy.com Camera: Erik Tande Thanks for watching! Discussion about this video: http://www.ericthecarguy.com/kunena/18-The-EricTheCarGuy-Video-Forum/64247-salvageyardhack-how-to-get-power-in-the-yard **Answers to your automotive questions found here: http://www.ericthecarguy.com/faq Related Videos Check Out Pull-A-Part!: https://www.youtube.com/watch?v=g8sDU2N2AQU Don't Be a Selfish Tool!: https://www.youtube.com/watch?v=waVeB6mzQP4 What To Look for in a Salvage Engine or Transmission: https://www.youtube.com/watch?v=6Q0f5DwpZ3Y Salvage Yard Pulls Playlist: https://www.youtube.com/playlist?list=PLSzhQ6St-ov1HXAlQz_cbjUIpTpjskU5X **Answers to your automotive questions found here: http://www.ericthecarguy.com/faq Social Network Links Facebook: https://www.facebook.com/EricTheCarGuy?fref=ts Twitter: https://twitter.com/EricTheCarGuy Google+: https://plus.google.com/100195180196698058780/posts Instagram: http://instagram.com/ericthecarguy Information on Premium Membership: https://www.ericthecarguy.com/premium-content-streaming-etcg-content Stay Dirty ETCG Due to factors beyond the control of EricTheCarGuy, it cannot guarantee against unauthorized modifications of this information, or improper use of this information.  EricTheCarGuy assumes no liability for property damage or injury incurred as a result of any of the information contained in this video. EricTheCarGuy recommends safe practices when working with power tools, automotive lifts, lifting tools, jack stands, electrical equipment, blunt instruments, chemicals, lubricants, or any other tools or equipment seen or implied in this video.  Due to factors beyond the control of EricTheCarGuy, no information contained in this video shall create any express or implied warranty or guarantee of any particular result.  Any injury, damage or loss that may result from improper use of these tools, equipment, or the information contained in this video is the sole responsibility of the user and not EricTheCarGuy.
Views: 56055 EricTheCarGuy
What Happens When You Don't Change Your Oil?
 
02:56
A lot of things happen to your engine when you don't change the oil. None of them good. In this video I highlight what happens to the rubber seals in your engine if you go extended periods between oil changes. I was able to repair this 2002 3.5RL by replacing the valve cover gaskets and cam seals. However, there still may be issues with some of the other rubber seals down the road. As I said in the video, this effects all the rubber seals in the engine, not just the valve covers. It may seem obvious, but be sure to change your oil on a regular basis to avoid the same fate. The best place for answers to your automotive questions: http://www.ericthecarguy.com Check out the ETCG Blog for the latest info: https://www.ericthecarguy.com/blog Check out my ETCG1 channel: https://www.youtube.com/user/ETCG1 Thanks for watching! Discussion about this video: https://www.ericthecarguy.com/kunena/18-The-EricTheCarGuy-Video-Forum/69982-what-happens-when-you-don-t-change-your-oil Related Videos Precious Automotive Fluids and How To Check Them: https://www.youtube.com/watch?v=N5OTB_yU-h8 How To Change Your Oil: https://www.youtube.com/watch?v=TgtUDTFxOkQ How To Safely Lift and Support Your Vehicle: https://www.youtube.com/watch?v=8OyzbGDn6xg&t=6s Everything You Always Wanted to Know About Oil but Were Afraid to Ask: https://www.youtube.com/watch?v=FXqkOZAkXZw&t=359s Top 5 Oil Change Tips: https://www.youtube.com/watch?v=iqCEIkU9r6U&t=3s How Oil Pressure Works: https://www.youtube.com/watch?v=8f2fcbTh5yw&t=8s How To Check Oil Pressure: https://www.youtube.com/watch?v=I8teB16U0LA&t=9s Regular Oil vs Synthetic Oil: https://www.youtube.com/watch?v=lshd7WR-a6I&t=36s #MobilOneYearOilChange: https://www.youtube.com/watch?v=q7ZS6cFfuXs&t=4s **Answers to your automotive questions found here: http://www.ericthecarguy.com/faq Social Network Links Facebook: https://www.facebook.com/EricTheCarGuy?fref=ts Twitter: https://twitter.com/EricTheCarGuy Google+: https://plus.google.com/100195180196698058780/posts Instagram: http://instagram.com/ericthecarguy Wanna see more stuff like this from ETCG? Information on Premium Membership: https://www.ericthecarguy.com/premium-content-streaming-etcg-content Stay Dirty ETCG Due to factors beyond the control of EricTheCarGuy, it cannot guarantee against unauthorized modifications of this information, or improper use of this information.  EricTheCarGuy assumes no liability for property damage or injury incurred as a result of any of the information contained in this video. EricTheCarGuy recommends safe practices when working with power tools, automotive lifts, lifting tools, jack stands, electrical equipment, blunt instruments, chemicals, lubricants, or any other tools or equipment seen or implied in this video.  Due to factors beyond the control of EricTheCarGuy, no information contained in this video shall create any express or implied warranty or guarantee of any particular result.  Any injury, damage or loss that may result from improper use of these tools, equipment, or the information contained in this video is the sole responsibility of the user and not EricTheCarGuy®.
Views: 114828 EricTheCarGuy
How To Drive A Stick Shift - EricTheCarGuy
 
09:29
Link to the clutch replacement on this car: http://www.ericthecarguy.com/vmanuals/22-vmanual-store/71-2002-ford-focus-clutch-replacement-vmanual Please visit me at: http://www.ericthecarguy.com/ Well I know this might seem pretty basic but I really think this rounds out the Focus Clutch series because now we have covered, diagnosis, replacement, and now prevention. If you have questions about how a clutch works please check out this video. http://www.youtube.com/watch?v=FfjGohWy-OU --- Click below and Stay Dirty Visit me at EricTheCarGuy.com http://ericthecarguy.com/ Visit EricTheCarGuy Forum http://www.ericthecarguy.com/forum/default.aspx Visit my Facebook Page: http://www.facebook.com/EricTheCarGuy --- Stay dirty everybody ETCG
Views: 248899 EricTheCarGuy
How To Avoid TPMS Damage When Changing Tires
 
02:21
This video shows you how to change tires without damaging TPMS sensors. The information in this video came at a price as I've broken a few TPMS sensors while changing tires in the past. I hope this information helps you avoid the same fate so that you can save yourself the time, hassle, and expense of breaking one of these sensors while changing a tire. The best place for answers to your automotive questions: http://www.ericthecarguy.com Check out the ETCG Blog for the latest info: https://www.ericthecarguy.com/blog Thanks for watching! Discussion about this video: https://www.ericthecarguy.com/kunena/18-The-EricTheCarGuy-Video-Forum/67974-how-to-avoid-tpms-damage-when-changing-tires My tire machine: http://www.bendpak.com/wheel-service/tire-changers/r76atr.aspx My Tire Balancer: http://www.bendpak.com/wheel-service/wheel-balancers/dst-2420.aspx Related Videos How To Reset TPMS Sensors: https://www.youtube.com/watch?v=MFphomFi75E Torquing Wheels and Why it is Important: https://www.youtube.com/watch?v=DA4ug4gHccM&t=7s Tires 101: https://www.youtube.com/watch?v=r547mitzNOw The Most Important Purchase for Your Vehicle: https://www.youtube.com/watch?v=bW2Tw3pJFqQ&t=3s How To Mount and Balance a Tire: https://www.youtube.com/watch?v=8hOZXIr1ujE Are You a Tire Junkie?: https://www.youtube.com/watch?v=iHWTYuhzbGc Ranger R76RTF Tire Machine Review & Demo: https://www.youtube.com/watch?v=prNdzp7Y22w Do You Need an Alignment?: https://www.youtube.com/watch?v=QBUxJSeYiow&t=3s How To Remove a Stuck Wheel: https://www.youtube.com/watch?v=H7PWwrcGREM Cool Story Bro, Finland and Nokian Tiers: https://www.youtube.com/watch?v=ako7gu7N7og How To Change a Flat Tire Using the Tools in Your Car: https://www.youtube.com/watch?v=zlyrv-h97z8 How To Remove Wheel Locks Without a Key: https://www.youtube.com/watch?v=mJUUyjJqk5A New Tires and Wheels #FairmontProject: https://www.youtube.com/watch?v=buD3hrUfxJk&t=28s **Answers to your automotive questions found here: http://www.ericthecarguy.com/faq Social Network Links Facebook: https://www.facebook.com/EricTheCarGuy?fref=ts Twitter: https://twitter.com/EricTheCarGuy Google+: https://plus.google.com/100195180196698058780/posts Instagram: http://instagram.com/ericthecarguy Wanna see more stuff like this from ETCG? Information on Premium Membership: https://www.ericthecarguy.com/premium-content-streaming-etcg-content Stay Dirty ETCG Due to factors beyond the control of EricTheCarGuy, it cannot guarantee against unauthorized modifications of this information, or improper use of this information.  EricTheCarGuy assumes no liability for property damage or injury incurred as a result of any of the information contained in this video. EricTheCarGuy recommends safe practices when working with power tools, automotive lifts, lifting tools, jack stands, electrical equipment, blunt instruments, chemicals, lubricants, or any other tools or equipment seen or implied in this video.  Due to factors beyond the control of EricTheCarGuy, no information contained in this video shall create any express or implied warranty or guarantee of any particular result.  Any injury, damage or loss that may result from improper use of these tools, equipment, or the information contained in this video is the sole responsibility of the user and not EricTheCarGuy.
Views: 65410 EricTheCarGuy
Precious Automotive Fluids, and how to check them - EricTheCarGuy
 
09:35
Precious Automotive Fluids, and how to check them - EricTheCarGuy In this ETCG episode we will be going over the basics of checking fluids. I know this isn't a stellar topic but it is useful information in my book. So many automotive systems are dependent on proper fluid levels. As always you can post a text or video response to this video if you have questions or visit me at --- Click below and Stay Dirty Visit me at EricTheCarGuy.com http://ericthecarguy.com/ Visit EricTheCarGuy Forum http://www.ericthecarguy.com/forum/default.aspx Visit my Facebook Page: http://www.facebook.com/EricTheCarGuy --- The clip at the beginning of this video is from "Dr. Strangelove", one of my favorites. It is not used as a motive for profit but instead for educational purposes under fair use. Be safe and stay dirty.
Views: 87454 EricTheCarGuy
How To Properly Gap Piston Rings
 
05:23
Check out Kalvinator Engines: http://www.kalvinatorengines.com Piston ring gap is critical to the operation of your engine. Especially if it's a performance, or boosted application like mine. In this video, Kevin Frische of Kalvinator Engines goes over the process and how to set your piston ring gap properly. Kevin has been doing this for several years and really knows what he's talking about. I hope this video helps if you're going to be installing piston rings on your engine. My pistons and rotating assembly: http://www.pbm-erson.com/Catalog/PBM/Rotating%20Assemblies/PBM%20Forged%20Rotating%20Assemblies/KIT34754FHS Thanks to Kevin Frische for his help in this video. Previous video in the series: https://www.youtube.com/watch?v=8RZ7_BONyHM The #FairmontProject playlist: https://www.youtube.com/watch?v=L22GsHQi7tU&list=PLSzhQ6St-ov2nxWVKCeU14Vt7JJ_QSZvs The best place for answers to your automotive questions: http://www.ericthecarguy.com Camera: Brian Kast Thanks for watching! Discussion about this video: https://www.ericthecarguy.com/kunena/18-The-EricTheCarGuy-Video-Forum/66460-how-to-properly-gap-piston-rings Tools Ring Square Tool: http://rehermorrison.com/product/universal-ring-squaring-tool/ Electric Ring File: https://www.summitracing.com/parts/pro-66765/overview/ Engine Details Displacement: 363cid The Block: http://www.pbm-erson.com/Catalog/PBM/Block%20Kits/KITSBK-29 The Crank: http://www.pbm-erson.com/Catalog/PBM/Clearance/PBM85207 The Heads: https://performanceparts.ford.com/part/M-6049-X302 Compression: 8.9:1 The Cam: Comp Cams custom grind: 222@.050" 222@.050 .357"lobe lift .571" valve lift (1.6 rocker) .351" lobe lift .562" valve lift (1.6 rocker) 114º separation 4ºadvance Modified: Edelbrock Performer RPM intake The Carburetor: https://www.holley.com/products/fuel_systems/carburetors/demon/mighty_demon/parts/5402020BT The Distributor: https://www.msdperformance.com/products/distributors/ford/parts/8582 The Ignition: https://www.msdperformance.com/products/ignitions/street_and_strip/parts/6462 The turbo Kit: http://www.on3performance.com/shop/1987-93-mustang-gtcobra-5-0-foxbody-turbo-system/ Related Videos The #FairmontProject series: https://www.youtube.com/watch?v=L22GsHQi7tU&list=PLSzhQ6St-ov2nxWVKCeU14Vt7JJ_QSZvs #DarkMatterPikachu on the Dyno: https://www.youtube.com/watch?v=UADOHm6-BJc Engine Balancing Video: https://www.youtube.com/watch?v=XjuGkXpha8Q **Answers to your automotive questions found here: http://www.ericthecarguy.com/faq Social Network Links Facebook: https://www.facebook.com/EricTheCarGuy?fref=ts Twitter: https://twitter.com/EricTheCarGuy Google+: https://plus.google.com/100195180196698058780/posts Instagram: http://instagram.com/ericthecarguy Wanna see more stuff like this from ETCG? Information on Premium Membership: https://www.ericthecarguy.com/premium-content-streaming-etcg-content Stay Dirty ETCG Due to factors beyond the control of EricTheCarGuy, it cannot guarantee against unauthorized modifications of this information, or improper use of this information.  EricTheCarGuy assumes no liability for property damage or injury incurred as a result of any of the information contained in this video. EricTheCarGuy recommends safe practices when working with power tools, automotive lifts, lifting tools, jack stands, electrical equipment, blunt instruments, chemicals, lubricants, or any other tools or equipment seen or implied in this video.  Due to factors beyond the control of EricTheCarGuy, no information contained in this video shall create any express or implied warranty or guarantee of any particular result.  Any injury, damage or loss that may result from improper use of these tools, equipment, or the information contained in this video is the sole responsibility of the user and not EricTheCarGuy.
Views: 142178 EricTheCarGuy
How To 'Top Off' Your AC System
 
16:14
Sometimes your AC system might not be working as good as it should. Sometimes this is due to a low system charge. In this video I walk you through the steps of topping off your AC system to get it to cool better. Keep in mind the pressures in this video may not be the same as what you might see on your vehicle. The pressures are dependent on the system your working on, the relative temperature, and relative humidity. **Note** This is not likely to work in all situations. Also, be sure and follow safe procedures when working with refrigerant. The best place for answers to your automotive questions: http://www.ericthecarguy.com Some of you may note a different cameraman. Don't worry, Brian is still working with me, he was just off when we shot this video. Camera: Derek Sims Thanks for watching! Additional Information on Diagnosing HVAC problems: https://www.ericthecarguy.com/faq/solving-automotive-hvac-problems Discussion about this video: https://www.ericthecarguy.com/kunena/18-The-EricTheCarGuy-Video-Forum/64981-how-to-top-off-your-ac-system Related videos AC System basics: http://www.youtube.com/watch?v=w17DpGCcRj8 AC Performance test: http://www.youtube.com/watch?v=XU_A4wNuHXI Finding and Repairing AC leaks: http://www.youtube.com/watch?v=95RdGLFIbL8 Recharging AC systems: http://www.youtube.com/watch?v=lglPJuBXVeE Tools Manifold Gauge Set: https://www.jbtoolsales.com/atd-tools-3695-deluxe-dual-aluminum-a-c-manifold-gauge-set#oid=1002_1 Vent Thermometer: https://www.jbtoolsales.com/robinair-10596-dial-thermometer-40-to-160f#oid=1002_1 Safety Glasses: https://www.jbtoolsales.com/sas-safety-5332-nsx-turbo-safety-glasses-yellow#oid=1002_1 **Answers to your automotive questions found here: http://www.ericthecarguy.com/faq Social Network Links Facebook: https://www.facebook.com/EricTheCarGuy?fref=ts Twitter: https://twitter.com/EricTheCarGuy Google+: https://plus.google.com/100195180196698058780/posts Instagram: http://instagram.com/ericthecarguy Information on Premium Membership: https://www.ericthecarguy.com/premium-content-streaming-etcg-content Stay Dirty ETCG Due to factors beyond the control of EricTheCarGuy, it cannot guarantee against unauthorized modifications of this information, or improper use of this information.  EricTheCarGuy assumes no liability for property damage or injury incurred as a result of any of the information contained in this video. EricTheCarGuy recommends safe practices when working with power tools, automotive lifts, lifting tools, jack stands, electrical equipment, blunt instruments, chemicals, lubricants, or any other tools or equipment seen or implied in this video.  Due to factors beyond the control of EricTheCarGuy, no information contained in this video shall create any express or implied warranty or guarantee of any particular result.  Any injury, damage or loss that may result from improper use of these tools, equipment, or the information contained in this video is the sole responsibility of the user and not EricTheCarGuy.
Views: 444860 EricTheCarGuy
How To Perform a Parasitic Draw Test - EricTheCarGuy
 
16:51
http://www.ericthecarguy.com/ This video has been a long timing coming and is one of the most requested things I get is about batteries going dead overnight so I'm very happy to finally bring you this video about the process of finding a parasitic draw which is a small drain on a battery above 50ma when the vehicle is shut off. Once you find the right fuse(s) the next step is to trace the components involved in that circuit till you find the source of the draw, you first start with a wiring diagram to give you an idea of where to start looking and then start unplugging things in that circuit to isolate the cause, it's quite scientific really a simple process of elimination. Here is a link to BBB's site that you can use to look up wiring diagrams for your application. http://www.bbbind.com/tech_database.html Good luck and if you have anymore questions check the database on my website and if you don't find what you're looking for there then post your question to my forum, here's a link. http://www.ericthecarguy.com/forum/default.aspx --- Click below and Stay Dirty Visit me at EricTheCarGuy.com http://ericthecarguy.com/ Visit EricTheCarGuy Forum http://www.ericthecarguy.com/forum/default.aspx Visit my Facebook Page: http://www.facebook.com/EricTheCarGuy --- Be safe, have fun, and stay dirty ETCG Due to factors beyond the control of EricTheCarGuy, it cannot guarantee against unauthorized modifications of this information, or improper use of this information.  EricTheCarGuy assumes no liability for property damage or injury incurred as a result of any of the information contained in this video. EricTheCarGuy recommends safe practices when working with power tools, automotive lifts, lifting tools, jack stands, electrical equipment, blunt instruments, chemicals, lubricants, or any other tools or equipment seen or implied in this video.  Due to factors beyond the control of EricTheCarGuy, no information contained in this video shall create any express or implied warranty or guarantee of any particular result.  Any injury, damage or loss that may result from improper use of these tools, equipment, or the information contained in this video is the sole responsibility of the user and not EricTheCarGuy.
Views: 1979487 EricTheCarGuy
Recommended Tools for the Salvage Yard
 
02:13
**Sponsored Video**I've put together this list of recommended tools to bring when you go to the salvage yard. A lot of it is just basic hand tools, but I do have some other recommendations like water and sunscreen. I highly recommend both of those so you don't end up dehydrated and slightly crispy like I did. If you're not familiar with Pull-A-Part, they're a self service salvage company in the US. They have 25 yards in 12 states. I'm not just saying this, but they've become my favorite place to go for salvage parts. I suggest you check them out. To make it easy, here's a link to their website: http://www.pullapart.com The best place for answers to your automotive questions: http://www.ericthecarguy.com Camera: Erik Tande Thanks for watching! Discussion about this video: http://www.ericthecarguy.com/kunena/18-The-EricTheCarGuy-Video-Forum/64148-recommended-tools-for-the-salvage-yard **Answers to your automotive questions found here: http://www.ericthecarguy.com/faq Related Videos Check Out Pull-a-Part!: https://www.youtube.com/watch?v=g8sDU2N2AQU Don't Be a Selfish Tool!: https://www.youtube.com/watch?v=waVeB6mzQP4 What To Look for in a Salvage Engine or Transmission: Salvage Yard Hack: How To Get Power in the Yard: Salvage Yard Pulls Playlist: **Answers to your automotive questions found here: http://www.ericthecarguy.com/faq Social Network Links Facebook: https://www.facebook.com/EricTheCarGuy?fref=ts Twitter: https://twitter.com/EricTheCarGuy Google+: https://plus.google.com/100195180196698058780/posts Instagram: http://instagram.com/ericthecarguy Information on Premium Membership: https://www.ericthecarguy.com/premium-content-streaming-etcg-content Stay Dirty ETCG Due to factors beyond the control of EricTheCarGuy, it cannot guarantee against unauthorized modifications of this information, or improper use of this information.  EricTheCarGuy assumes no liability for property damage or injury incurred as a result of any of the information contained in this video. EricTheCarGuy recommends safe practices when working with power tools, automotive lifts, lifting tools, jack stands, electrical equipment, blunt instruments, chemicals, lubricants, or any other tools or equipment seen or implied in this video.  Due to factors beyond the control of EricTheCarGuy, no information contained in this video shall create any express or implied warranty or guarantee of any particular result.  Any injury, damage or loss that may result from improper use of these tools, equipment, or the information contained in this video is the sole responsibility of the user and not EricTheCarGuy.
Views: 82357 EricTheCarGuy
AC System Basics - EricTheCarGuy
 
06:12
This is a kind of video response to a question I got from RadicalComedy about servicing her AC system. Keep in mind that this is a very basic overview of the components and operation of the AC system. In future installments I plan to get more in depth about the operation and function of these parts but for now I think 6 minutes of your time is enough. Visit RadicalComedy's channel http://www.youtube.com/user/RadicalComedy Visit me at EricTheCarGuy.com http://ericthecarguy.com/ Visit EricTheCarGuy Forum http://www.ericthecarguy.com/forum/default.aspx Visit my Facebook Page: http://www.facebook.com/EricTheCarGuy Stay dirty and cool if you can. ETCG
Views: 1672385 EricTheCarGuy
How To Resurface Cylinder Heads
 
04:30
Check out Kalvinator Engines: http://www.kalvinatorengines.com This is not something you do in your garage at home. As you can see in the video, to do this 'properly', you need specialized equipment like the machine you see in this video. Since not many people get to see this process in action, I decided to make this video while I was at Kalvinator Engines having my engine built, #DarkMatterPikachu. I hope you enjoy it as much as I enjoyed making this video. Thanks to Justin Frische for his help in this video. Previous video in the series: https://www.youtube.com/watch?v=IOpm6WpVavk The #FairmontProject playlist: https://www.youtube.com/watch?v=L22GsHQi7tU&list=PLSzhQ6St-ov2nxWVKCeU14Vt7JJ_QSZvs The best place for answers to your automotive questions: http://www.ericthecarguy.com Camera: Brian Kast Thanks for watching! Discussion about this video: https://www.ericthecarguy.com/kunena/18-The-EricTheCarGuy-Video-Forum/66298-how-to-resurface-cylinder-heads Engine Details Displacement: 363cid The Block: http://www.pbm-erson.com/Catalog/PBM/Block%20Kits/KITSBK-29 The Crank: http://www.pbm-erson.com/Catalog/PBM/Clearance/PBM85207 The Heads: https://performanceparts.ford.com/part/M-6049-X302 Compression: 8.9:1 The Cam: Comp Cams custom grind: 222@.050" 222@.050 .357"lobe lift .571" valve lift (1.6 rocker) .351" lobe lift .562" valve lift (1.6 rocker) 114º separation 4ºadvance Modified: Edelbrock Performer RPM intake The Carburetor: https://www.holley.com/products/fuel_systems/carburetors/demon/mighty_demon/parts/5402020BT The Distributor: https://www.msdperformance.com/products/distributors/ford/parts/8582 The Ignition: https://www.msdperformance.com/products/ignitions/street_and_strip/parts/6462 The turbo Kit: http://www.on3performance.com/shop/1987-93-mustang-gtcobra-5-0-foxbody-turbo-system/ Related Videos The #FairmontProject series: https://www.youtube.com/watch?v=L22GsHQi7tU&list=PLSzhQ6St-ov2nxWVKCeU14Vt7JJ_QSZvs #DarkMatterPikachu on the Dyno: https://www.youtube.com/watch?v=UADOHm6-BJc Engine Balancing Video: https://www.youtube.com/watch?v=XjuGkXpha8Q **Answers to your automotive questions found here: http://www.ericthecarguy.com/faq Social Network Links Facebook: https://www.facebook.com/EricTheCarGuy?fref=ts Twitter: https://twitter.com/EricTheCarGuy Google+: https://plus.google.com/100195180196698058780/posts Instagram: http://instagram.com/ericthecarguy Wanna see more stuff like this from ETCG? Information on Premium Membership: https://www.ericthecarguy.com/premium-content-streaming-etcg-content Stay Dirty ETCG Due to factors beyond the control of EricTheCarGuy, it cannot guarantee against unauthorized modifications of this information, or improper use of this information.  EricTheCarGuy assumes no liability for property damage or injury incurred as a result of any of the information contained in this video. EricTheCarGuy recommends safe practices when working with power tools, automotive lifts, lifting tools, jack stands, electrical equipment, blunt instruments, chemicals, lubricants, or any other tools or equipment seen or implied in this video.  Due to factors beyond the control of EricTheCarGuy, no information contained in this video shall create any express or implied warranty or guarantee of any particular result.  Any injury, damage or loss that may result from improper use of these tools, equipment, or the information contained in this video is the sole responsibility of the user and not EricTheCarGuy.
Views: 135437 EricTheCarGuy
#DarkMatterPikachu's Cylinder Heads #FairmontProject
 
04:07
For those of you not aware, the engine in my #FairmontProject has a name, #DarkMatterPikachu. Here's how it got that name. https://www.youtube.com/watch?v=euGuucHprZM This is another video in the Engine Series for the #FairmontProject. In this installment we go over the modifications made to the X302 cylinder heads I used. These are the same cylinder heads I got from the parts Mustang. Kevin did find one bent valve in addition to the work he mentioned in the video. I'm not surprised based on what I saw during the teardown. You can watch the tear down here: https://www.youtube.com/watch?v=y7qHlmKzWG0 There will also be a video on the enlargement of the stud holes which I will link here after it's posted: Previous video in the series: https://www.youtube.com/watch?v=XjuGkXpha8Q The #FairmontProject playlist: https://www.youtube.com/watch?v=L22GsHQi7tU&list=PLSzhQ6St-ov2nxWVKCeU14Vt7JJ_QSZvs The best place for answers to your automotive questions: http://www.ericthecarguy.com Camera: Brian Kast Thanks for watching! Discussion about this video: https://www.ericthecarguy.com/kunena/18-The-EricTheCarGuy-Video-Forum/66132-darkmatterpikachu-s-cylinder-heads Kalvinator Engines: http://www.kalvinatorengines.com Comp Cams: http://www.compcams.com Engine Details Displacement: 363cid The Block: http://www.pbm-erson.com/Catalog/PBM/Block%20Kits/KITSBK-29 The Crank: http://www.pbm-erson.com/Catalog/PBM/Clearance/PBM85207 The Heads: https://performanceparts.ford.com/part/M-6049-X302 Compression: 8.9:1 The Cam: Comp Cams custom grind: 222@.050" 222@.050 .357"lobe lift .571" valve lift (1.6 rocker) .351" lobe lift .562" valve lift (1.6 rocker) 114º separation 4ºadvance Modified: Edelbrock Performer RPM intake The Carburetor: https://www.holley.com/products/fuel_systems/carburetors/demon/mighty_demon/parts/5402020BT The Distributor: https://www.msdperformance.com/products/distributors/ford/parts/8582 The Ignition: https://www.msdperformance.com/products/ignitions/street_and_strip/parts/6462 The turbo Kit: http://www.on3performance.com/shop/1987-93-mustang-gtcobra-5-0-foxbody-turbo-system/ Related Videos The #FairmontProject series: https://www.youtube.com/watch?v=L22GsHQi7tU&list=PLSzhQ6St-ov2nxWVKCeU14Vt7JJ_QSZvs #DarkMatterPikachu on the Dyno: https://www.youtube.com/watch?v=UADOHm6-BJc **Answers to your automotive questions found here: http://www.ericthecarguy.com/faq Social Network Links Facebook: https://www.facebook.com/EricTheCarGuy?fref=ts Twitter: https://twitter.com/EricTheCarGuy Google+: https://plus.google.com/100195180196698058780/posts Instagram: http://instagram.com/ericthecarguy Information on Premium Membership: https://www.ericthecarguy.com/premium-content-streaming-etcg-content Stay Dirty ETCG Due to factors beyond the control of EricTheCarGuy, it cannot guarantee against unauthorized modifications of this information, or improper use of this information.  EricTheCarGuy assumes no liability for property damage or injury incurred as a result of any of the information contained in this video. EricTheCarGuy recommends safe practices when working with power tools, automotive lifts, lifting tools, jack stands, electrical equipment, blunt instruments, chemicals, lubricants, or any other tools or equipment seen or implied in this video.  Due to factors beyond the control of EricTheCarGuy, no information contained in this video shall create any express or implied warranty or guarantee of any particular result.  Any injury, damage or loss that may result from improper use of these tools, equipment, or the information contained in this video is the sole responsibility of the user and not EricTheCarGuy.
Views: 44927 EricTheCarGuy
The Basics of Disc Brake Service -EricTheCarGuy
 
10:19
This might seem like pretty basic information but it is important and often overlooked. If you have noisy brakes you might want to try this. Also, if you feel your brake performance isn't as good as it could be this might be something you could try. It's also a good idea to do this to your vehicle every so often to make sure things are working as they should. This can prevent sticking caliper slides as well as the noise I mentioned. The Honda service interval is about every 30,000 miles. I think that's a good number to start with for servicing brakes. Here are some useful links for you. Silicone Paste: http://www.jbtoolsales.com/3m-08946-silicone-paste-8-oz/#oid=1002_1 Anti Sieze: http://www.jbtoolsales.com/3m-08945-brake-lube-anti-seize/#oid=1002_1 Pry Bar Set: http://www.jbtoolsales.com/performance-tool-1911-3-pc-pry-bar-set-8-12-18/#oid=1002_1 Safety Glasses: http://www.jbtoolsales.com/gateway-safety-4675-amber-temple-amber-lens-safety-glasses/#oid=1002_1 Disc Brake Pad Replacement Video: http://www.youtube.com/watch?v=lAviOGXzEUk Replacing Rear Disc Brake Pads: http://www.youtube.com/watch?v=3kf8C4Qxu-A Brake Caliper Replacement: http://www.youtube.com/watch?v=_UqTgYgd0Mk How To Replace Brake Fluid: http://www.youtube.com/watch?v=V5O_pbC8R2E Discussion about this video: http://www.ericthecarguy.com/kunena/18-The-EricTheCarGuy-Video-Forum/48302-disc-brake-service-basics#80630 The best place for answers to your automotive questions: http://www.ericthecarguy.com Facebook: https://www.facebook.com/EricTheCarGuy?fref=ts Twitter: https://twitter.com/EricTheCarGuy Google+: https://plus.google.com/100195180196698058780/posts Information on Premium Membership: https://www.ericthecarguy.com/premium-content-streaming-etcg-content Stay Dirty ETCG Due to factors beyond the control of EricTheCarGuy, it cannot guarantee against unauthorized modifications of this information, or improper use of this information.  EricTheCarGuy assumes no liability for property damage or injury incurred as a result of any of the information contained in this video. EricTheCarGuy recommends safe practices when working with power tools, automotive lifts, lifting tools, jack stands, electrical equipment, blunt instruments, chemicals, lubricants, or any other tools or equipment seen or implied in this video.  Due to factors beyond the control of EricTheCarGuy, no information contained in this video shall create any express or implied warranty or guarantee of any particular result.  Any injury, damage or loss that may result from improper use of these tools, equipment, or the information contained in this video is the sole responsibility of the user and not EricTheCarGuy.
Views: 190534 EricTheCarGuy
Load Testing A Battery - EricTheCarGuy
 
06:36
Load Testing A Battery - EricTheCarGuy http://www.ericthecarguy.com/ Whenever I post a video these days I wonder if I covered everything and if I presented the information correctly. I have that feeling with this video as there is so much I could cover with batteries. Lets just call this one the "quick" version and hopefully it will get you through the process of checking the battery without too much trouble. --- Click below and Stay Dirty Visit me at EricTheCarGuy.com http://ericthecarguy.com/ Visit EricTheCarGuy Forum http://www.ericthecarguy.com/forum/default.aspx Visit my Facebook Page: http://www.facebook.com/EricTheCarGuy --- Stay dirty ETCG Due to factors beyond the control of EricTheCarGuy, it cannot guarantee against unauthorized modifications of this information, or improper use of this information.  EricTheCarGuy assumes no liability for property damage or injury incurred as a result of any of the information contained in this video. EricTheCarGuy recommends safe practices when working with power tools, automotive lifts, lifting tools, jack stands, electrical equipment, blunt instruments, chemicals, lubricants, or any other tools or equipment seen or implied in this video.  Due to factors beyond the control of EricTheCarGuy, no information contained in this video shall create any express or implied warranty or guarantee of any particular result.  Any injury, damage or loss that may result from improper use of these tools, equipment, or the information contained in this video is the sole responsibility of the user and not EricTheCarGuy.
Views: 227120 EricTheCarGuy
Re:  Regular Oil vs Synthetic Oil -EricTheCarGuy
 
11:57
Visit me at: http://www.ericthecarguy.com/ I knew the original video would spark discussion and apparently it's caused quite a stir over at iATN. I also felt that some of what I said in the last video needed clarification. For those reasons I've made this Re: video. I'm not going to claim to be an expert on oil, I'm just speaking from personal experience. I still don't think I'm done with this topic and I invite any 'experts' who wish to express their opinions on this topic to join me in the next video(s). If you wish to participate in a future video on this topic please contact me at biz@ericthecarguy.com. Here are links to the videos mentioned in the video. Original video: http://www.youtube.com/watch?v=lshd7WR-a6I Subaru Trans fluid: Part 1 http://www.youtube.com/watch?v=AVhXQti8Qv4 Part 2 http://www.youtube.com/watch?v=Lf4nRy6Zn_k Subaru Differential Fluid: http://www.youtube.com/watch?v=vT_UG36HdhQ V6 Valve Adjustment: Part 1 http://www.youtube.com/watch?v=OnyqVg3nWRk Part 2 http://www.youtube.com/watch?v=iLdgivYwUiQ Discussion about this topic: http://www.ericthecarguy.com/kunena/18-The-EricTheCarGuy-Video-Forum/42962-synthetic-vs-regular-oil Stay dirty ETCG Due to factors beyond the control of EricTheCarGuy, it cannot guarantee against unauthorized modifications of this information, or improper use of this information.  EricTheCarGuy assumes no liability for property damage or injury incurred as a result of any of the information contained in this video. EricTheCarGuy recommends safe practices when working with power tools, automotive lifts, lifting tools, jack stands, electrical equipment, blunt instruments, chemicals, lubricants, or any other tools or equipment seen or implied in this video.  Due to factors beyond the control of EricTheCarGuy, no information contained in this video shall create any express or implied warranty or guarantee of any particular result.  Any injury, damage or loss that may result from improper use of these tools, equipment, or the information contained in this video is the sole responsibility of the user and not EricTheCarGuy.
Views: 1674091 EricTheCarGuy
Front Disc Brakes and How to Replace Them - EricTheCarGuy
 
09:53
Well here you are after many requests for this one it's finally here. I shot this last spring but I've been saving it for you as a special present. In this episode we go over the principals of operation and replacement of a basic front disc brake set up. It all starts with a shaking steering wheel and ends with new brakes. I think this is a pretty good video overall and gives the important information you would need to perform this task yourself. A couple of notes. I didn't have time to go over how to isolate a brake pulsation between front or rear in this video. Also, I had a very easy time of getting these rotors off, I can assure you that this is not often the case, I could probably do a video just on removing difficult rotors alone. I may do a video on that in the future as I collect some different scenarios for you. --- Click below and Stay Dirty Visit me at EricTheCarGuy.com http://ericthecarguy.com/ Visit EricTheCarGuy Forum http://www.ericthecarguy.com/forum/default.aspx Visit my Facebook Page: http://www.facebook.com/EricTheCarGuy --- The Blog http://ericthecarguy.blogspot.com/ And you can always leave your questions and comments for me to answer here as a video or text response, I'm here for you after all. Stay dirty ETCG Due to factors beyond the control of EricTheCarGuy, it cannot guarantee against unauthorized modifications of this information, or improper use of this information.  EricTheCarGuy assumes no liability for property damage or injury incurred as a result of any of the information contained in this video. EricTheCarGuy recommends safe practices when working with power tools, automotive lifts, lifting tools, jack stands, electrical equipment, blunt instruments, chemicals, lubricants, or any other tools or equipment seen or implied in this video.  Due to factors beyond the control of EricTheCarGuy, no information contained in this video shall create any express or implied warranty or guarantee of any particular result.  Any injury, damage or loss that may result from improper use of these tools, equipment, or the information contained in this video is the sole responsibility of the user and not EricTheCarGuy.
Views: 385791 EricTheCarGuy
How To Fix Exhaust Rattles - EricTheCarGuy
 
04:23
Visit me at: http://www.ericthecarguy.com/ As long as we are on the subject of exhaust I figured why not solve the rattle I've had in the Subaru exhaust since I got the car. This is a simple affordable method that has never let me down, remember if you need to do a large shield you can always string together more hose clamps. --- Click below and Stay Dirty Visit me at EricTheCarGuy.com http://ericthecarguy.com/ Visit EricTheCarGuy Forum http://www.ericthecarguy.com/forum/default.aspx Visit my Facebook Page: http://www.facebook.com/EricTheCarGuy --- Stay dirty ETCG Due to factors beyond the control of EricTheCarGuy, it cannot guarantee against unauthorized modifications of this information, or improper use of this information.  EricTheCarGuy assumes no liability for property damage or injury incurred as a result of any of the information contained in this video. EricTheCarGuy recommends safe practices when working with power tools, automotive lifts, lifting tools, jack stands, electrical equipment, blunt instruments, chemicals, lubricants, or any other tools or equipment seen or implied in this video.  Due to factors beyond the control of EricTheCarGuy, no information contained in this video shall create any express or implied warranty or guarantee of any particular result.  Any injury, damage or loss that may result from improper use of these tools, equipment, or the information contained in this video is the sole responsibility of the user and not EricTheCarGuy.
Views: 734688 EricTheCarGuy
How to Find Exhaust Leaks - EricTheCarGuy
 
06:26
Visit me at: http://www.ericthecarguy.com/ Every once in a while you run into a situation where you just can't find that pesky leak and in my experience this is one of the easiest ways to locate a hard to find leak like that. Of corse this works best when you have a 'helper' so if you're going to try this you might want to grab a friend first. --- Click below and Stay Dirty Visit me at EricTheCarGuy.com http://ericthecarguy.com/ Visit EricTheCarGuy Forum http://www.ericthecarguy.com/forum/default.aspx Visit my Facebook Page: http://www.facebook.com/EricTheCarGuy --- Stay dirty Due to factors beyond the control of EricTheCarGuy, it cannot guarantee against unauthorized modifications of this information, or improper use of this information.  EricTheCarGuy assumes no liability for property damage or injury incurred as a result of any of the information contained in this video. EricTheCarGuy recommends safe practices when working with power tools, automotive lifts, lifting tools, jack stands, electrical equipment, blunt instruments, chemicals, lubricants, or any other tools or equipment seen or implied in this video.  Due to factors beyond the control of EricTheCarGuy, no information contained in this video shall create any express or implied warranty or guarantee of any particular result.  Any injury, damage or loss that may result from improper use of these tools, equipment, or the information contained in this video is the sole responsibility of the user and not EricTheCarGuy.
Views: 843237 EricTheCarGuy
Tires 101 - EricTheCarGuy
 
08:10
In this episode I go over some of the basics of tire sizes and where to find them for your vehicle. I know that there are more things that I can cover here so if you have questions please post them and I will address them. I want to thank Scott Armstrong from Armstrong automotive for letting me shoot this in his shop, he is a nice guy for letting a degenerate like me hang out with my video camera doing my little show. As promised in the video here is a link to a very informative site that covers much of the information in the video in detail. http://www.tirerack.com/about/techcenter.jsp --- Click below and Stay Dirty Visit me at EricTheCarGuy.com http://ericthecarguy.com/ Visit EricTheCarGuy Forum http://www.ericthecarguy.com/forum/default.aspx Visit my Facebook Page: http://www.facebook.com/EricTheCarGuy --- Stay safe and stay dirty
Views: 181239 EricTheCarGuy
Kryptonite For Stubborn Screws - The Shake-n-Break
 
03:29
Wivco Design Shake-n-Break $43.85: https://www.jbtoolsales.com/wivco-design-th28-000-shake-n-break-impact-screw-remover#oid=1002_1 Wivco Design Website: http://www.wivco.com Recommended Air Hammer: https://www.jbtoolsales.com/ingersoll-rand-121-k6-air-hammer-kit-401-shank-super-duty#oid=1002_1 Wivco sent me this tool a little while ago. I was waiting for an opportunity to try it out. When this RL came in for a brake job that required me removing the rotors, I thought this would be a perfect opportunity to try out the tool. It worked flawlessly as you see in the video. I think I'll put my impact driver away the next time I need to remove rotor screws. I'm sure this also works on other screws that might give you similar trouble. I was sold after it got these rotor screws loose. Wivco did not pay me to say any of this. When a tool works, I'm happy to talk about it. Thanks for watching! The best place for answers to your automotive questions: http://www.ericthecarguy.com Discussion about this video: http://www.ericthecarguy.com/kunena/18-The-EricTheCarGuy-Video-Forum/63234-kryptonite-for-stubborn-screws-the-shake-n-break#163240 Related Videos Alternative Method of Removing Rotor Screws: https://www.youtube.com/watch?v=YxQk7Pz_vfc Useful articles. Engine overheat: http://www.ericthecarguy.com/faq/what-to-do-when-your-engine-overheats No start problems: http://www.ericthecarguy.com/faq/solving-automotive-no-start-problems Idle issues: http://www.ericthecarguy.com/faq/solving-automotive-idle-problems Performance issues: http://www.ericthecarguy.com/faq/solving-automotive-performance-issues Diagnosing Noises: http://www.ericthecarguy.com/faq/diagnosing-noises-in-your-car Diagnosing Vibrations: http://www.ericthecarguy.com/faq/determining-the-causes-of-vehicle-vibrations Electrical Problems: http://www.ericthecarguy.com/faq/solving-automotive-electrical-problems Brake Issues: http://www.ericthecarguy.com/faq/solving-brake-problems Transmission issues: http://www.ericthecarguy.com/faq/solving-transmission-problems HVAC problems: http://www.ericthecarguy.com/faq/solving-automotive-hvac-problems Buying a Used Car: http://www.ericthecarguy.com/faq/what-to-look-for-in-a-used-car-purchase Leaks: http://www.ericthecarguy.com/faq/finding-and-fixing-leaks MPG: http://ericthecarguy.com/faq/finding-and-fixing-the-causes-of-poor-mpg The best place for answers to your automotive questions: http://www.ericthecarguy.com Social Network Links Facebook: https://www.facebook.com/EricTheCarGuy?fref=ts Twitter: https://twitter.com/EricTheCarGuy Google+: https://plus.google.com/100195180196698058780/posts Instagram: http://instagram.com/ericthecarguy Information on Premium Membership: https://www.ericthecarguy.com/premium-content-streaming-etcg-content Stay Dirty ETCG Tool Review Disclaimer: ETCG is not paid to do tool reviews. Yes, I get to keep the tools after the review, but I do not receive any financial compensation for any reviews. The views expressed in this video are my own and unsolicited. Due to factors beyond the control of EricTheCarGuy, it cannot guarantee against unauthorized modifications of this information, or improper use of this information.  EricTheCarGuy assumes no liability for property damage or injury incurred as a result of any of the information contained in this video. EricTheCarGuy recommends safe practices when working with power tools, automotive lifts, lifting tools, jack stands, electrical equipment, blunt instruments, chemicals, lubricants, or any other tools or equipment seen or implied in this video.  Due to factors beyond the control of EricTheCarGuy, no information contained in this video shall create any express or implied warranty or guarantee of any particular result.  Any injury, damage or loss that may result from improper use of these tools, equipment, or the information contained in this video is the sole responsibility of the user and not EricTheCarGuy.
Views: 119344 EricTheCarGuy
Restoring Headlights with 3M Kit -EricTheCarGuy
 
09:43
I've done other headlight restoration videos, one in fact, but when I tried this kit earlier this year I found it to be the easiest and most effective kit that I've used to date. I chose the kit for the drill but if you don't have a drill you can also get the 'human' operated kit. As you'll see in the video that kit comes with a few extra items. Just be sure to mask off the area before you begin work. If not, you might end up with some scratches on your finish. Otherwise I feel this is something any DIYer can do and get great results from. Learn more about the 3M kit: http://3mauto.com/products/headlight-restoration Suggested links for purchase. Hand powered kit: http://www.amazon.com/3M-39084-Headlight-Restoration-Kit/dp/B006VB8JTQ/ref=sr_1_4?ie=UTF8&qid=1413495363&sr=8-4&keywords=3m+headlight+restoration+kit Drill Powered Kit: http://www.jbtoolsales.com/3m-39008-headlight-restoration-kit/#oid=1002_1 Tools. Cordless Drill: http://www.jbtoolsales.com/buffalo-tools-ps07215-18-volt-cordless-drill/#oid=1002_1 Related videos. How To Restore Headlights: https://www.youtube.com/watch?v=iRl8hGhKth8 How To Aim Headlights: https://www.youtube.com/watch?v=yQ3OZnzR1Zc How To Aim Headlights with Hoppy's: https://www.youtube.com/watch?v=O3GOz8cX7Dw Useful Articles. Electrical Problems http://www.ericthecarguy.com/faq/solving-automotive-electrical-problems Engine overheat http://www.ericthecarguy.com/faq/what-to-do-when-your-engine-overheats No start problems http://www.ericthecarguy.com/faq/solving-automotive-no-start-problems Idle issues http://www.ericthecarguy.com/faq/solving-automotive-idle-problems Performance issues http://www.ericthecarguy.com/faq/solving-automotive-performance-issues Diagnosing Noises http://www.ericthecarguy.com/faq/diagnosing-noises-in-your-car Diagnosing Vibrations http://www.ericthecarguy.com/faq/determining-the-causes-of-vehicle-vibrations Brake Issues http://www.ericthecarguy.com/faq/solving-brake-problems Transmission issues http://www.ericthecarguy.com/faq/solving-transmission-problems HVAC problems http://www.ericthecarguy.com/faq/solving-automotive-hvac-problems Buying a Used Car http://www.ericthecarguy.com/faq/what-to-look-for-in-a-used-car-purchase Leaks http://www.ericthecarguy.com/faq/finding-and-fixing-leaks MPG http://ericthecarguy.com/faq/finding-and-fixing-the-causes-of-poor-mpg Discussion about this Video: http://www.ericthecarguy.com/kunena/18-The-EricTheCarGuy-Video-Forum/54316-restoring-headlights-with-3m-kit#116427 ETCG Forum: http://www.ericthecarguy.com/component/kunena/1-stay-dirty-lounge?Itemid=0 Facebook: https://www.facebook.com/EricTheCarGuy?fref=ts Twitter: https://twitter.com/EricTheCarGuy Google+: https://plus.google.com/100195180196698058780/posts Information on Premium Membership: http://www.ericthecarguy.com/premium-content-streaming-etcg-content Stay Dirty ETCG Due to factors beyond the control of EricTheCarGuy, it cannot guarantee against unauthorized modifications of this information, or improper use of this information.  EricTheCarGuy assumes no liability for property damage or injury incurred as a result of any of the information contained in this video. EricTheCarGuy recommends safe practices when working with power tools, automotive lifts, lifting tools, jack stands, electrical equipment, blunt instruments, chemicals, lubricants, or any other tools or equipment seen or implied in this video.  Due to factors beyond the control of EricTheCarGuy, no information contained in this video shall create any express or implied warranty or guarantee of any particular result.  Any injury, damage or loss that may result from improper use of these tools, equipment, or the information contained in this video is the sole responsibility of the user and not EricTheCarGuy.
Views: 371874 EricTheCarGuy
What Happens to Bondo Bodywork After a Couple of Years?
 
02:59
About 3 years ago I did some body repairs to the rear quarter panels on my 1993 Acura Vigor. To be honest, this was a $500 car and I didn't put too much effort into it. My main goal was to seal up a water leak. It only took about a year to start to see the paint bubble again indicating the rust had returned. Perhaps I could have done a better job of removing the old rust, but it's been my experience that if you don't cut the rust out completely and replace it with new metal, it's very likely that the rust will come back in a couple of years. I'm not saying you shouldn't use Bondo, or do fiberglass repairs to your vehicle. I'm just trying to point out something that Neil Young sang about years ago, Rust Never Sleeps. So don't be surprised if in a couple of years after you do a bond repair that the rust comes back. At least my trunk doesn't leak anymore, and that was my main goal. The best place for answers to your automotive questions: http://www.ericthecarguy.com Check out my ETCG1 channel: https://www.youtube.com/user/ETCG1 Check out the ETCG Blog for the latest info: https://www.ericthecarguy.com/blog Thanks for watching! Discussion about this video: https://www.ericthecarguy.com/kunena/18-The-EricTheCarGuy-Video-Forum/69552-what-happens-to-bondo-bodywork-after-a-couple-of-years Related Videos Easy Rust Repair the 'Hack' Way: https://www.youtube.com/watch?v=Kw5CNQJJkaA Finding Water Leaks: https://www.youtube.com/watch?v=tecuW9cB-Xk Introduction to my Acura Vigor: https://www.youtube.com/watch?v=GgKqLr353VY Acura Vigor Blower Motor Replacement (Part 1): https://www.youtube.com/watch?v=StNJ7Gz1NPc Acura Vigor Blower Motor Replacement (Part 2): https://www.youtube.com/watch?v=ga2DS5Q6IH0 Body Shop Repairs: https://www.youtube.com/watch?v=a5RRJZrhkBI A Day in the Shop with EricTheCarGuy: https://www.youtube.com/watch?v=-vZf7qx_Q_k Cool Story Bro, Acura Vigor: https://www.youtube.com/watch?v=N4U1pxnQ6as **Answers to your automotive questions found here: http://www.ericthecarguy.com/faq Social Network Links Facebook: https://www.facebook.com/EricTheCarGuy?fref=ts Twitter: https://twitter.com/EricTheCarGuy Google+: https://plus.google.com/100195180196698058780/posts Instagram: http://instagram.com/ericthecarguy Wanna see more stuff like this from ETCG? Information on Premium Membership: https://www.ericthecarguy.com/premium-content-streaming-etcg-content Stay Dirty ETCG Due to factors beyond the control of EricTheCarGuy, it cannot guarantee against unauthorized modifications of this information, or improper use of this information.  EricTheCarGuy assumes no liability for property damage or injury incurred as a result of any of the information contained in this video. EricTheCarGuy recommends safe practices when working with power tools, automotive lifts, lifting tools, jack stands, electrical equipment, blunt instruments, chemicals, lubricants, or any other tools or equipment seen or implied in this video.  Due to factors beyond the control of EricTheCarGuy, no information contained in this video shall create any express or implied warranty or guarantee of any particular result.  Any injury, damage or loss that may result from improper use of these tools, equipment, or the information contained in this video is the sole responsibility of the user and not EricTheCarGuy.
Views: 99018 EricTheCarGuy
How To Degree a Camshaft
 
14:29
Check out Kalvinator Engines: http://www.kalvinatorengines.com If you're building a performance engine, degreeing the camshaft is a must. As shown in the video, you need to verify the grind of the cam. If you don't, and there's a problem with performance later, you have only yourself to blame. More info from Comp Cams found here: http://www.compcams.com Thanks to Kevin Frische for his help in this video. Previous video in the series: https://www.youtube.com/watch?v=st0X4k3EH18 The #FairmontProject playlist: https://www.youtube.com/watch?v=L22GsHQi7tU&list=PLSzhQ6St-ov2nxWVKCeU14Vt7JJ_QSZvs The best place for answers to your automotive questions: http://www.ericthecarguy.com Camera: Brian Kast Thanks for watching! Discussion about this video: https://www.ericthecarguy.com/kunena/18-The-EricTheCarGuy-Video-Forum/66615-how-to-degree-a-camshaft Tools Degree Wheel: http://www.compperformancegroupstores.com/store/merchant.mvc?Screen=PROD&Store_Code=CC&Product_Code=4790&Category_Code= Degree kits: http://www.compperformancegroupstores.com/store/merchant.mvc?Screen=SRCH&Store_Code=CC&Search=degree%20wheel Camshaft dial indicator: http://www.speedwaymotors.com/Camshaft-Dial-Indicator,9868.html?sku=58666838&utm_medium=CSEGoogle&utm_source=CSE&utm_campaign=CSEGOOGLE&gclid=CLK8yIqKs9ACFdgDgQod2A4MXg Piston stop tool: https://www.summitracing.com/parts/sum-900188?seid=srese1&cm_mmc=pla-google-_-shopping-_-srese1-_-summit-racing&gclid=CLeyq6uKs9ACFVc8gQodXmYL8Q Related videos Engine dissection: https://www.youtube.com/watch?v=saPGX-1qC4M The #FairmontProject series: https://www.youtube.com/watch?v=L22GsHQi7tU&list=PLSzhQ6St-ov2nxWVKCeU14Vt7JJ_QSZvs #DarkMatterPikachu on the Dyno: https://www.youtube.com/watch?v=UADOHm6-BJc Engine Balancing Video: https://www.youtube.com/watch?v=XjuGkXpha8Q Engine Details Displacement: 363cid The Block: http://www.pbm-erson.com/Catalog/PBM/Block%20Kits/KITSBK-29 The Crank: http://www.pbm-erson.com/Catalog/PBM/Clearance/PBM85207 The Heads: https://performanceparts.ford.com/part/M-6049-X302 Compression: 8.9:1 The Cam: Comp Cams custom grind: 222@.050" 222@.050 .357"lobe lift .571" valve lift (1.6 rocker) .351" lobe lift .562" valve lift (1.6 rocker) 114º separation 4ºadvance Modified: Edelbrock Performer RPM intake The Carburetor: https://www.holley.com/products/fuel_systems/carburetors/demon/mighty_demon/parts/5402020BT The Distributor: https://www.msdperformance.com/products/distributors/ford/parts/8582 The Ignition: https://www.msdperformance.com/products/ignitions/street_and_strip/parts/6462 The turbo Kit: http://www.on3performance.com/shop/1987-93-mustang-gtcobra-5-0-foxbody-turbo-system/ **Answers to your automotive questions found here: http://www.ericthecarguy.com/faq Social Network Links Facebook: https://www.facebook.com/EricTheCarGuy?fref=ts Twitter: https://twitter.com/EricTheCarGuy Google+: https://plus.google.com/100195180196698058780/posts Instagram: http://instagram.com/ericthecarguy Wanna see more stuff like this from ETCG? Information on Premium Membership: https://www.ericthecarguy.com/premium-content-streaming-etcg-content Stay Dirty ETCG Due to factors beyond the control of EricTheCarGuy, it cannot guarantee against unauthorized modifications of this information, or improper use of this information.  EricTheCarGuy assumes no liability for property damage or injury incurred as a result of any of the information contained in this video. EricTheCarGuy recommends safe practices when working with power tools, automotive lifts, lifting tools, jack stands, electrical equipment, blunt instruments, chemicals, lubricants, or any other tools or equipment seen or implied in this video.  Due to factors beyond the control of EricTheCarGuy, no information contained in this video shall create any express or implied warranty or guarantee of any particular result.  Any injury, damage or loss that may result from improper use of these tools, equipment, or the information contained in this video is the sole responsibility of the user and not EricTheCarGuy.
Views: 160799 EricTheCarGuy
How To Remove and Install Studs the 'Easy' Way
 
02:03
While shooting the Sonoma engine video series I needed to remove a couple of studs from the old cylinder head. I often use this '2 nut method' to do this. I thought I would make a separate video showing this process. You can also use special sockets for this but if you don't have one of those, this method will work just fine. Here's some useful links for you. Sonoma Engine Video series Part 1: http://www.youtube.com/watch?v=5ivqj2LjE28 Stud Removal tool: http://www.jbtoolsales.com/cta-tools-9011-stud-remover/ Discussion about this video: http://www.ericthecarguy.com/kunena/18-The-EricTheCarGuy-Video-Forum/47406-removing-studs-the-2-nut-method#74396 Visit me at: http://www.ericthecarguy.com Facebook: https://www.facebook.com/EricTheCarGuy?fref=ts Twitter: https://twitter.com/EricTheCarGuy Google+: https://plus.google.com/100195180196698058780/posts Information on Premium Membership: https://www.ericthecarguy.com/premium-content-streaming-etcg-content Stay Dirty ETCG Due to factors beyond the control of EricTheCarGuy, it cannot guarantee against unauthorized modifications of this information, or improper use of this information.  EricTheCarGuy assumes no liability for property damage or injury incurred as a result of any of the information contained in this video. EricTheCarGuy recommends safe practices when working with power tools, automotive lifts, lifting tools, jack stands, electrical equipment, blunt instruments, chemicals, lubricants, or any other tools or equipment seen or implied in this video.  Due to factors beyond the control of EricTheCarGuy, no information contained in this video shall create any express or implied warranty or guarantee of any particular result.  Any injury, damage or loss that may result from improper use of these tools, equipment, or the information contained in this video is the sole responsibility of the user and not EricTheCarGuy.
Views: 54288 EricTheCarGuy
How To Perform A Power Balance Test  - EricTheCarGuy
 
07:47
How To Perform A Power Balance Test - EricTheCarGuy http://www.ericthecarguy.com/ As I said in the video I do get a lot of questions regarding engine performance, the power balance test is very helpful at nailing down an engine miss should you have one. I hope to cover the coil pack ignition systems at some point in the future as the opportunity presents itself, sorry I don't have it for you hear now but I will post it as soon as I get the opportunity. Thanks for watching. --- Click below and Stay Dirty Visit me at EricTheCarGuy.com http://ericthecarguy.com/ Visit EricTheCarGuy Forum http://www.ericthecarguy.com/forum/default.aspx Visit my Facebook Page: http://www.facebook.com/EricTheCarGuy --- ETCG Due to factors beyond the control of EricTheCarGuy, it cannot guarantee against unauthorized modifications of this information, or improper use of this information.  EricTheCarGuy assumes no liability for property damage or injury incurred as a result of any of the information contained in this video. EricTheCarGuy recommends safe practices when working with power tools, automotive lifts, lifting tools, jack stands, electrical equipment, blunt instruments, chemicals, lubricants, or any other tools or equipment seen or implied in this video.  Due to factors beyond the control of EricTheCarGuy, no information contained in this video shall create any express or implied warranty or guarantee of any particular result.  Any injury, damage or loss that may result from improper use of these tools, equipment, or the information contained in this video is the sole responsibility of the user and not EricTheCarGuy.
Views: 218574 EricTheCarGuy
How to Diagnose A Bad Clutch - EricTheCarGuy
 
05:41
Link to clutch replacement video for this car. http://www.ericthecarguy.com/vmanuals/vm/2002-ford-focus-clutch-replacement-vmanual Visit me at: http://www.ericthecarguy.com This one will end up being part of a larger series of videos about clutches and their diagnosis and replacement, I'm even going to post a video on 'How To Drive A Stick Shift' as part of this series. So in this installment I cover the basic steps in determining if you NEED a clutch or not. --- Click below and Stay Dirty Visit me at EricTheCarGuy.com http://ericthecarguy.com/ Visit EricTheCarGuy Forum http://www.ericthecarguy.com/forum/default.aspx Visit my Facebook Page: http://www.facebook.com/EricTheCarGuy --- Stay dirty ETCG Due to factors beyond the control of EricTheCarGuy, it cannot guarantee against unauthorized modifications of this information, or improper use of this information.  EricTheCarGuy assumes no liability for property damage or injury incurred as a result of any of the information contained in this video. EricTheCarGuy recommends safe practices when working with power tools, automotive lifts, lifting tools, jack stands, electrical equipment, blunt instruments, chemicals, lubricants, or any other tools or equipment seen or implied in this video.  Due to factors beyond the control of EricTheCarGuy, no information contained in this video shall create any express or implied warranty or guarantee of any particular result.  Any injury, damage or loss that may result from improper use of these tools, equipment, or the information contained in this video is the sole responsibility of the user and not EricTheCarGuy.
Views: 2563854 EricTheCarGuy
Don't Let This Happen To You!!
 
12:44
Please be careful!! While transferring my engine from my engine hoist to my engine stand it fell to the ground. I was fortunate that I didn't get hurt. To be honest, it was completely my fault. I shouldn't have been doing what I was doing during the transfer. In this video I show you what to avoid, as well as what I did to remedy the problem so that it would never happen again. I hope this video helps you if you run into a similar situation. If nothing else, I hope it shows you what to avoid so that it never happens to you in the first place. My Patreon Account: https://www.patreon.com/EricTheCarGuy The best place for answers to your automotive questions: http://www.ericthecarguy.com Check out the ETCG Blog for the latest info: https://www.ericthecarguy.com/blog Check out my ETCG1 channel: https://www.youtube.com/user/ETCG1 Thanks for watching! My Engine Hoist: https://www.jbtoolsales.com/sunex-tools-5222-2-ton-engine-crane-w-dual-pump-pistons#oid=1002_1 My Engine Stand: https://www.jbtoolsales.com/sunex-tools-8400-1-ton-engine-stand#oid=1002_1 My Welder: https://www.longevity-inc.com/mig-welders/productdetail-291-mig-welder-migweld-140-php My Grinder: https://www.jbtoolsales.com/makita-9557pbx1-4-1-2-angle-grinder#oid=1002_1 Related Videos Engine Hoist Review: https://www.youtube.com/watch?v=5OTQn5vbavE&t=25s Engine Stand Review: https://www.youtube.com/watch?v=fzIEdMALx20&t=5s Welder Review: https://www.youtube.com/watch?v=0n2CzzF0aAE The Mini Series: https://www.youtube.com/watch?v=3WpqmJT_Wc0&list=PLSzhQ6St-ov37fMEv1xKYiu36MgvzUscu The Fairmont Fire, The Take Away: https://www.youtube.com/watch?v=d9wDitj9Te4 Engine Removal 1982 Mustang: https://www.youtube.com/watch?v=5wINaHUrX7o&t=905s 2002 Dodge Ram 4.7L Engine Removal (Part 1): https://www.youtube.com/watch?v=oc3zSgEA8Jk&t=2s How To Wash Your Engine: https://www.youtube.com/watch?v=3JXxCGUZVYw&t=14s **Answers to your automotive questions found here: http://www.ericthecarguy.com/faq Social Network Links Facebook: https://www.facebook.com/EricTheCarGuy?fref=ts Twitter: https://twitter.com/EricTheCarGuy Google+: https://plus.google.com/100195180196698058780/posts Instagram: http://instagram.com/ericthecarguy Wanna see more stuff like this from ETCG? Information on Premium Membership: https://www.ericthecarguy.com/premium-content-streaming-etcg-content Stay Dirty ETCG Due to factors beyond the control of EricTheCarGuy, it cannot guarantee against unauthorized modifications of this information, or improper use of this information.  EricTheCarGuy assumes no liability for property damage or injury incurred as a result of any of the information contained in this video. EricTheCarGuy recommends safe practices when working with power tools, automotive lifts, lifting tools, jack stands, electrical equipment, blunt instruments, chemicals, lubricants, or any other tools or equipment seen or implied in this video.  Due to factors beyond the control of EricTheCarGuy, no information contained in this video shall create any express or implied warranty or guarantee of any particular result.  Any injury, damage or loss that may result from improper use of these tools, equipment, or the information contained in this video is the sole responsibility of the user and not EricTheCarGuy®.
Views: 186179 EricTheCarGuy
This is Why My New Turbo is Better
 
04:33
Recently I had some engine problems with the Fairmont that required a complete tear down. Instead of putting everything back the way it was, I've decided to do some upgrades. One of the biggest upgrades is a new 67mm ceramic ball bearing turbo. This turbo will spool up faster and potentially make more power as a result. I'm going to keep the old turbo so that I might one day to a head to head of these 2 turbos on the dyno. I think it would be great to actually proved whether or not this new turbo makes more power. My original turbo kit: http://www.on3performance.com/shop/1987-93-mustang-gtcobra-5-0-foxbody-turbo-system/ My original turbo: http://www.poweraddersolutions.com/on-3-performance-70mm-journal-bearing-turbocharger/ My new turbo: http://www.on3performance.com/shop/on-3-performance-67mm-ceramic-ball-bearing-turbocharger-67-65/ My Patreon Account: https://www.patreon.com/EricTheCarGuy The best place for answers to your automotive questions: http://www.ericthecarguy.com Check out the ETCG Blog for the latest info: https://www.ericthecarguy.com/blog Check out my ETCG1 channel: https://www.youtube.com/user/ETCG1 Thanks for watching! Related Videos This is what I believe happened to my engine: https://www.youtube.com/watch?v=K0x5BUIuEPc 5 Things You Should Know When Building a Turbocharged Engine: https://www.youtube.com/watch?v=9b0G4cI70as&t=8s What Does Clocking a Turbo Mean?: https://www.youtube.com/watch?v=dLY3l9D_lro Test Fitting the New Turbo Engine and Transmission: https://www.youtube.com/watch?v=17bfwKUxpmY&t=1358s Fitting the Intercooler and Cold Side Pipes: https://www.youtube.com/watch?v=PbsLo1EXjU0 The #FairmontProject Playlist: https://www.youtube.com/watch?v=L22GsHQi7tU&list=PLSzhQ6St-ov2nxWVKCeU14Vt7JJ_QSZvs Yes, there will be more #FairmontProject videos. I'm looking for help with editing the content I've already shot. Once that's sorted out, I plan to start posting Fairmont videos in addition to the regular Friday repair videos. **Answers to your automotive questions found here: http://www.ericthecarguy.com/faq Social Network Links (This is where you can find out what happened to my engine) Facebook: https://www.facebook.com/EricTheCarGuy?fref=ts Twitter: https://twitter.com/EricTheCarGuy Google+: https://plus.google.com/100195180196698058780/posts Instagram: http://instagram.com/ericthecarguy Wanna see more stuff like this from ETCG? Information on Premium Membership: https://www.ericthecarguy.com/premium-content-streaming-etcg-content Stay Dirty ETCG Due to factors beyond the control of EricTheCarGuy, it cannot guarantee against unauthorized modifications of this information, or improper use of this information.  EricTheCarGuy assumes no liability for property damage or injury incurred as a result of any of the information contained in this video. EricTheCarGuy recommends safe practices when working with power tools, automotive lifts, lifting tools, jack stands, electrical equipment, blunt instruments, chemicals, lubricants, or any other tools or equipment seen or implied in this video.  Due to factors beyond the control of EricTheCarGuy, no information contained in this video shall create any express or implied warranty or guarantee of any particular result.  Any injury, damage or loss that may result from improper use of these tools, equipment, or the information contained in this video is the sole responsibility of the user and not EricTheCarGuy®.
Views: 48717 EricTheCarGuy
What is Metal Rescue?
 
05:12
**Sponsored Video** How do you get rid of rust but not the other stuff that the rust may be covering up? Metal Rescue is your solution. It's an environmentally friendly solution to this very problem. In this video I demonstrate how Metal Rescue works. I even have some cool time lapse for you. I use it, I like it, and I recommend it if you're looking to remove rust from something. They did NOT pay me to say that. That is my own opinion and I stick by it. Learn more about Metal Rescue: https://www.workshophero.com/buy-metal-rescue-rust-remover-bath/ Check out Metal Rescue's playlist: https://youtu.be/wV1wicul400 Thank you for watching! Music from YouTube's Music Library. Bluebird Love Explosion The best place for answers to your automotive questions: http://www.ericthecarguy.com Check out the ETCG Blog for the latest info: https://www.ericthecarguy.com/blog Check out my ETCG1 channel: https://www.youtube.com/user/ETCG1 Thanks for watching! Discussion about this video: https://www.ericthecarguy.com/kunena/18-The-EricTheCarGuy-Video-Forum/69932-what-is-metal-rescue **Answers to your automotive questions found here: http://www.ericthecarguy.com/faq Social Network Links Facebook: https://www.facebook.com/EricTheCarGuy?fref=ts Twitter: https://twitter.com/EricTheCarGuy Google+: https://plus.google.com/100195180196698058780/posts Instagram: http://instagram.com/ericthecarguy Wanna see more stuff like this from ETCG? Information on Premium Membership: https://www.ericthecarguy.com/premium-content-streaming-etcg-content Stay Dirty ETCG Due to factors beyond the control of EricTheCarGuy, it cannot guarantee against unauthorized modifications of this information, or improper use of this information.  EricTheCarGuy assumes no liability for property damage or injury incurred as a result of any of the information contained in this video. EricTheCarGuy recommends safe practices when working with power tools, automotive lifts, lifting tools, jack stands, electrical equipment, blunt instruments, chemicals, lubricants, or any other tools or equipment seen or implied in this video.  Due to factors beyond the control of EricTheCarGuy, no information contained in this video shall create any express or implied warranty or guarantee of any particular result.  Any injury, damage or loss that may result from improper use of these tools, equipment, or the information contained in this video is the sole responsibility of the user and not EricTheCarGuy®.
Views: 78449 EricTheCarGuy
Drum Brakes a Quick Look - EricTheCarGuy
 
05:11
Here is a brief overview of the basic set up and operation of drum brakes. I've had a couple of requests for this one and I'm happy to address those questions here. I will be making a longer version of this video that will eventually be for sale on the ETCG website. This video will not only cover the operation but it will also cover brake shoe replacement. As always you can visit me at EricTheCarGuy.com which is now slightly smaller for those of you with smaller viewing screens. Visit me at EricTheCarGuy.com http://ericthecarguy.com/ Visit EricTheCarGuy Forum http://www.ericthecarguy.com/forum/default.aspx Visit my Facebook Page: http://www.facebook.com/EricTheCarGuy Feel free to submit show ideas as a text or video response to this video. Stay dirty ETCG
Views: 418980 EricTheCarGuy
A Brief History of the T5 Transmission with Paul Cangialosi -EricTheCarGuy
 
04:29
A Paul Cangialosi has been working on transmissions for more than 30 years. To say he knows a thing or 2 about transmissions would be beyond understatement. When Paul stopped by the shop to help rebuild the T5 that will be going into my 1979 Fairmont, he asked if I'd like to hear more about the history of the transmission. Of course I said yes and you now have this video covering the history of the longest running manual transmission ever. Camera: Brian Kast Thanks for watching! The best place for answers to your automotive questions: http://www.ericthecarguy.com Visit http://www.5speeds.com for more helpful information from Paul Cangialosi. Pauls book on rebuilding manual transmissions: http://www.5speeds.com/cart/index.php?route=product/product&product_id=33 Electronic version of Paul's book: https://books.google.com/books/about/How_to_Rebuild_and_Modify_High_Performan.html?id=OexeE4mTsZYC Paul's YouTube Channel: https://www.youtube.com/user/GearWorldTV Related videos What Speedometer Gear is Right For You?: https://www.youtube.com/watch?v=fMEe5SySuxA How a Manual Transmission Works: https://www.youtube.com/watch?v=d9clD8ZL8xA A Quick Easy Way To Determine Axle Ratio: https://www.youtube.com/watch?v=xY1mcbotJ9A T-5 Transmission Rebuild with Paul Cangialosi: Link posted when video becomes available. Discussion about this video: http://www.ericthecarguy.com/kunena/18-The-EricTheCarGuy-Video-Forum/61012-a-brief-history-of-the-t5-transmission-with-paul-c#152502 Useful articles. Engine overheat: http://www.ericthecarguy.com/faq/what-to-do-when-your-engine-overheats No start problems: http://www.ericthecarguy.com/faq/solving-automotive-no-start-problems Idle issues: http://www.ericthecarguy.com/faq/solving-automotive-idle-problems Performance issues: http://www.ericthecarguy.com/faq/solving-automotive-performance-issues Diagnosing Noises: http://www.ericthecarguy.com/faq/diagnosing-noises-in-your-car Diagnosing Vibrations: http://www.ericthecarguy.com/faq/determining-the-causes-of-vehicle-vibrations Electrical Problems: http://www.ericthecarguy.com/faq/solving-automotive-electrical-problems Brake Issues: http://www.ericthecarguy.com/faq/solving-brake-problems Transmission issues: http://www.ericthecarguy.com/faq/solving-transmission-problems HVAC problems: http://www.ericthecarguy.com/faq/solving-automotive-hvac-problems Buying a Used Car: http://www.ericthecarguy.com/faq/what-to-look-for-in-a-used-car-purchase Leaks: http://www.ericthecarguy.com/faq/finding-and-fixing-leaks MPG: http://ericthecarguy.com/faq/finding-and-fixing-the-causes-of-poor-mpg The best place for answers to your automotive questions: http://www.ericthecarguy.com Social Network Links Facebook: https://www.facebook.com/EricTheCarGuy?fref=ts Twitter: https://twitter.com/EricTheCarGuy Google+: https://plus.google.com/100195180196698058780/posts Instagram: http://instagram.com/ericthecarguy Information on Premium Membership: https://www.ericthecarguy.com/premium-content-streaming-etcg-content Stay Dirty ETCG Due to factors beyond the control of EricTheCarGuy, it cannot guarantee against unauthorized modifications of this information, or improper use of this information.  EricTheCarGuy assumes no liability for property damage or injury incurred as a result of any of the information contained in this video. EricTheCarGuy recommends safe practices when working with power tools, automotive lifts, lifting tools, jack stands, electrical equipment, blunt instruments, chemicals, lubricants, or any other tools or equipment seen or implied in this video.  Due to factors beyond the control of EricTheCarGuy, no information contained in this video shall create any express or implied warranty or guarantee of any particular result.  Any injury, damage or loss that may result from improper use of these tools, equipment, or the information contained in this video is the sole responsibility of the user and not EricTheCarGuy.
Views: 45994 EricTheCarGuy
How To Find A Noise - EricTheCarGuy
 
04:00
How To Find A Noise - EricTheCarGuy http://www.ericthecarguy.com/ Well it might seem pretty basic but finding a noise can be pretty tricky at times, my hope is that you take the time to track down the source before you give up and start buying parts, perhaps the methods that I show here will help you to that end. You know I'm always trying to look out for you right? --- Click below and Stay Dirty Visit me at EricTheCarGuy.com http://ericthecarguy.com/ Visit EricTheCarGuy Forum http://www.ericthecarguy.com/forum/default.aspx Visit my Facebook Page: http://www.facebook.com/EricTheCarGuy --- ETCG Due to factors beyond the control of EricTheCarGuy, it cannot guarantee against unauthorized modifications of this information, or improper use of this information.  EricTheCarGuy assumes no liability for property damage or injury incurred as a result of any of the information contained in this video. EricTheCarGuy recommends safe practices when working with power tools, automotive lifts, lifting tools, jack stands, electrical equipment, blunt instruments, chemicals, lubricants, or any other tools or equipment seen or implied in this video.  Due to factors beyond the control of EricTheCarGuy, no information contained in this video shall create any express or implied warranty or guarantee of any particular result.  Any injury, damage or loss that may result from improper use of these tools, equipment, or the information contained in this video is the sole responsibility of the user and not EricTheCarGuy.
Views: 202312 EricTheCarGuy
No Start, Diagnostic Basics - EricTheCarGuy
 
06:57
This video is a response to the Honda Main Relay video that I did. I've had a couple of people come to me with questions about no start conditions and how they should go about fixing them. This video is a starting point to a series that I plan to cover on this subject. The point I make in the video over and over is, don't make assumptions. Assumptions get expensive and can frustrate you to the point of homicide, follow these simple tips and it will lead you down the path of success. --- Click below and Stay Dirty Visit me at EricTheCarGuy.com http://ericthecarguy.com/ Visit EricTheCarGuy Forum http://www.ericthecarguy.com/forum/default.aspx Visit my Facebook Page: http://www.facebook.com/EricTheCarGuy --- Stay dirty ETCG Due to factors beyond the control of EricTheCarGuy, it cannot guarantee against unauthorized modifications of this information, or improper use of this information.  EricTheCarGuy assumes no liability for property damage or injury incurred as a result of any of the information contained in this video. EricTheCarGuy recommends safe practices when working with power tools, automotive lifts, lifting tools, jack stands, electrical equipment, blunt instruments, chemicals, lubricants, or any other tools or equipment seen or implied in this video.  Due to factors beyond the control of EricTheCarGuy, no information contained in this video shall create any express or implied warranty or guarantee of any particular result.  Any injury, damage or loss that may result from improper use of these tools, equipment, or the information contained in this video is the sole responsibility of the user and not EricTheCarGuy.
Views: 699889 EricTheCarGuy
$0.00 Performance Upgrade - EricTheCarGuy
 
03:30
$0.00 Performance Upgrade - EricTheCarGuy http://www.ericthecarguy.com/ Yea, it's true something as simple as this can increase performance, just make sure you don't get it too tight and have fun impressing your friends with this cool little trick. --- Click below and Stay Dirty Visit me at EricTheCarGuy.com http://ericthecarguy.com/ Visit EricTheCarGuy Forum http://www.ericthecarguy.com/forum/default.aspx Visit my Facebook Page: http://www.facebook.com/EricTheCarGuy --- Stay dirty ETCG Due to factors beyond the control of EricTheCarGuy, it cannot guarantee against unauthorized modifications of this information, or improper use of this information.  EricTheCarGuy assumes no liability for property damage or injury incurred as a result of any of the information contained in this video. EricTheCarGuy recommends safe practices when working with power tools, automotive lifts, lifting tools, jack stands, electrical equipment, blunt instruments, chemicals, lubricants, or any other tools or equipment seen or implied in this video.  Due to factors beyond the control of EricTheCarGuy, no information contained in this video shall create any express or implied warranty or guarantee of any particular result.  Any injury, damage or loss that may result from improper use of these tools, equipment, or the information contained in this video is the sole responsibility of the user and not EricTheCarGuy.
Views: 1854364 EricTheCarGuy
How To Find Out if Your Engine Has Bent Valves
 
05:11
If you have an engine miss or performance problem, don’t forget to check for a mechanical problem, such as compression loss, with the engine. This video covers compression testing which will help you determine if your engine has a mechanical problem like mine did. The video links below will also help you. To find a specific cylinder that’s causing a problem, perform a Power Balance Test: https://www.youtube.com/watch?v=bAOmUjAjNjE How To Perform a Compression Test: https://www.youtube.com/watch?v=X_tbksFYhl4 How To Perform a Leak Down Test: https://www.youtube.com/watch?v=WgrfT0LFMhc&t=4s My Patreon Account: https://www.patreon.com/EricTheCarGuy The best place for answers to your automotive questions: http://www.ericthecarguy.com Check out the ETCG Blog for the latest info: https://www.ericthecarguy.com/blog Check out my ETCG1 channel: https://www.youtube.com/user/ETCG1?sub_confirmation=1 Thanks for watching! Tools Compression Tester: https://www.jbtoolsales.com/otc-5606-compression-tester-kit#oid=1002_1 Ingersoll Rand 3/8" Impact: https://www.jbtoolsales.com/ingersoll-rand-w5132-k12-iqv20-3-8-drive-impactool-bl2022-kit#oid=1002_1 Related Videos How To Replace Valves: https://www.youtube.com/watch?v=qEe8C5u1LWg&t=704s How To Remove Valve Springs Inside the Car: https://www.youtube.com/watch?v=_uO5YayiLrA Honda Accord Valve Adjustment: https://www.youtube.com/watch?v=P7wI4EtZSaA What To Do When Your Timing Belt Breaks: https://www.youtube.com/watch?v=enPNb8dxCZk&t=30s Introducing The Mini Series: https://youtu.be/Ajsk8kgafXg 2007-2013 Mini Cooper S (R56) Battery Replacement: https://youtu.be/3WpqmJT_Wc0 Carpet and Seat Installation R56 Mini Cooper: https://youtu.be/19BDsW4J7UE Mini Cooper S (R56) Front End Removal: https://youtu.be/2RfQsOwBZHk Mini Cooper Oil Leak Repairs (R56/N14): https://youtu.be/7MWiOnZxURw Direct Injection Intake Valve Cleaning (R56/N14): https://youtu.be/JJcX0eRZmFA Mini N14 Timing Chain Replacement: https://youtu.be/VoPz9sEvYN4 Mini Cooper Clutch Replacement: https://youtu.be/EGFpis7V27w Mini Cooper Engine Installation (Part 1): https://youtu.be/56lB1hDngqU Mini Cooper Engine Installation (Part 2): https://youtu.be/4oXAD1YRbCk Mini Cooper Rear Hatch Won’t Latch Repair: https://youtu.be/F0nuP7sfhZs The Mini Series: https://www.youtube.com/watch?v=3WpqmJT_Wc0&list=PLSzhQ6St-ov37fMEv1xKYiu36MgvzUscu **Answers to your automotive questions found here: http://www.ericthecarguy.com/faq Social Network Links Facebook: https://www.facebook.com/EricTheCarGuy?fref=ts Twitter: https://twitter.com/EricTheCarGuy Google+: https://plus.google.com/100195180196698058780/posts Instagram: http://instagram.com/ericthecarguy Wanna see more stuff like this from ETCG? Information on Premium Membership: https://www.ericthecarguy.com/premium-content-streaming-etcg-content Stay Dirty ETCG Due to factors beyond the control of EricTheCarGuy, it cannot guarantee against unauthorized modifications of this information, or improper use of this information.  EricTheCarGuy assumes no liability for property damage or injury incurred as a result of any of the information contained in this video. EricTheCarGuy recommends safe practices when working with power tools, automotive lifts, lifting tools, jack stands, electrical equipment, blunt instruments, chemicals, lubricants, or any other tools or equipment seen or implied in this video.  Due to factors beyond the control of EricTheCarGuy, no information contained in this video shall create any express or implied warranty or guarantee of any particular result.  Any injury, damage or loss that may result from improper use of these tools, equipment, or the information contained in this video is the sole responsibility of the user and not EricTheCarGuy®.
Views: 41661 EricTheCarGuy